Jump to content
SAU Community

Recommended Posts

Hey guys,

just got our new Trust Drag intercooler from CRD(thanks guys).

Its the biggest one that you can buy off the shelf.

its 710mm wide X 305mm high X a massive 165mm thick(150mm tube).

I'll be putting the cooler on this weekend, if CRD have time i'll get a power run on the sat morning then fit the cooler and then another one once the shop opens back up.

maybe even try and rerun on the sat.(fit on the friday night).

Once the cooler is fitted i can then rule out any pressure drop across the core.

I'm thinking that once this cooler is on and the 4" exhaust is back on the 700cc injectors will impose a power restriction.

CRD have said they normally see them max out at around 500-520 awkw. I'll be glade if our set-up can make that sort of power with the 33d that we have.

I know that with the 4" exhaust n the car will come on boost earlier and i should see the 500 at about 8000rpm.Since there should be no restriction up top the only thing stopping power all the way to its 8500rpm limiter would be the turbo it self.

The set-up now on the GTR is a TRUST exhaust manifold SARD wastegate, TRUST T88-33D, TRUST 710 X 305 X 165 intercooler. 4"piping to a HYPERTUNE intake manifold and HYPERTUNE 100mm TB.

The head is also ported.The cams are only the tomei 260 9.15 pon units, bu ti think they will work well with the small exhaust housing.

I'll let you all know how the new set-up goes and back to back them with our old GT-SS set-up.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/148001-just-got-our-new-trust-drag-cooler/
Share on other sites

I Have to take some photos and take them around to dough boy to put up how about i just give him the photos of the intercoolers and the dyno tuns on sat as i'vce just booked the car in for a power run at C&V at 7.30 on sat morning wich should give the guys at Hypertune enough time to install the cooler to a stage where i can drive the car around for the after power run.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
    • Hey mate, really appreciate the help. Have been looking pretty extensively myself and was certain they were retro fitted, but then ended up finding a 4 door with what looks like the same side skirts or at least the closest I’ve seen. The photos from the Offset Kings event at Sunrise 2016. https://fatlace.com/offset-kings-okayama-at-sunrise/
×
×
  • Create New...