Jump to content
SAU Community

Recommended Posts

I use BP Ultimate, when i get down to just above a quarter i have about 270 on the clock and this is while driving normal, no thrashing. I got the car tuned about 6 months back and everything was fine, i was getting this same KM amount even before i got the car tuned. I don't really want to let the fuel get to almost empty, so i'm thinking i would get around the 350 mark if i almost let it go to empty.

Could it be my 02 sensor or AFM?, or do the KM sound ok?

thanks

the mods i have are:

PFC

FMIC

3" Turbo exhaust

11 pounds

Pod CAI

also got some irridium spark plugs put in

Edited by Hulk1010
Link to comment
https://www.sau.com.au/forums/topic/148232-how-much-im-getting-each-tank/
Share on other sites

^^^ that is the big thing. there is no point saying 3/4 of a tank, as to 1 person it may be 30L, to another it may be 40L.

work it out as L/100k's. so if you get 270k to 40L then you divide 40 by 2.7, which gives you 14.8L/100ks.

also if you have a pfc then it should be due to the tune, not anything else if it hasn't changed after the tune.

also it depends on what you class as normal driving. if you class it as changing gears at 4000rpm after using 90% throttle to get to 4000rpm, then you will get different economy to someone who may rev to 5000rpm but only use 40% throttle.

I too get crap fuel economy from my R34 GT-t, around 300-350 max around the city. Doesn't seem to make much difference if I drive like a granny. I'm thinking of changing my O2 sensor as I'm putting in a new dump pipe next week anyway.

What is the general consensus on O2 sensors to suit this? I know several people have been using the Falcon I6 ones successfully. Should I get one of these? Whats the part number?

Thanks!

What you can do is fill your tank, record how many kilometers you have gone before you fill up again (use the odometer thing) I usually use 60 or 100km and take note of how many litres it takes to fill the tank at that 60 or 100km mark. So say 100km ended up taking 19L, then divide the size of your tank by the 19L, and then take that number and mulyiply it by 100 and you will get a number that is near the amount of kilometers you would get to a tank. sorry if any of that is worded wierd, it's 3am where I am.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...