Jump to content
SAU Community

Recommended Posts

My r32 doesnt go to bad, its not level but the turbo doesnt get a full length on me, but the turbo i raced has a few probs to iron out, my cars got a 2.5ltr so yeah its a evenish comparision for the r33, mine a bit lighter though, got nfi what the power is though.

AFAIK, when Nissan released the R34 range they decided it was time to give the old RB series a bit of revamp - hence the introduction of the Neo Strait 6 engine. In addition to various other improvements the Neo engines got VVT, however the GTR's RB26DETT did not. (this may be the reason that Nissan can get away with quoting the official power output of the R34's RB25DET as 280PS & the the R34 GTR's RB26DETT at 280PS also!:mad:

I have seen 1, R33 series Skyline (late model) that had a Neo strait 6 engine in it - whether Nissan officially produced the R33 with the newer Neo's in it I can say - it could have been a conversion or something as simple as bolting on the "Neo" plastic engine cover...

Cheers

Dave

  • 2 weeks later...
  • 2 weeks later...

HPI has road tested an NA GTS25 against an NA Supra, their figures show 0-100 in 7.3 and 1/4 mile in 15.5 which is accurate in my case cos ive done my 0-100 in just under that time and the quarter sounds right. the car made 105 kw at the wheels, this is stocko with a muffler i think, pretty good i guess, id like 150 at the wheels on mine

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...