Jump to content
SAU Community

Recommended Posts

hey guys i thought it's time to sell my beast and move on to other things , its a R32 GTS4 with fully built RB26 the engine was installed in japan but it got built here

MOTOR : CP pistons

cryo rods

cryo crank

full port and polished head

N1 oil pump

brand new water pump

camtic head gasket

power FC with hand control

all gates hoses and belts

600x100 trust fmic

polished plenum and all piping

3 inch trust stainless exaust from turbo

bosch 044 fuel pump

nismo rebuilt 5 puck 600 hp clutch

TURBO : garrett GT3540

twin R33 airflow meters

stainless polished pipes off front of turbo

tial 44mm wastegate

all braided lines

SUSPENSION: tein coilovers all round

cusco rear diff

BODY :fine silver paint on the bottom

custom made candy gold on top with black pin strip

HOK pearl ice through the whole car

du-luck front bar with nismo race side skirts

and a big rear bar from japan

shaved boot key hole

twin vent carbon fibre bonnet

tinted windows

paint job is about 2 months old

INTERIOR : GTR seats

4 HKS guages

jvc touch screen head unit

new leather boots for gear knob and hand break

the engine has about 5000k's on it and it is in perfect condition it has never been down the

strip as it was planned to at jamboree i am the first owner in australia , the car was tuned

at godzilla motorsports by mark jacobson the car made 507 hp on 21 psi at the wheels ,

there could of been more boost so the car should easly make the 530 hp 400kw . its an

animal on the street so the buyer will be very happy, on the street the car only runs off the

wastegate which is 13 psi , the car will not be sold with a boostcontroller never got around

to getting a new one sorry . the car should be running a high 10 low 11 in 4wd im located in

brisbane south side 0422883933 matt will sell anywhere in aus , prefer brisbane . no joy rides

thanks . if i think of anything else i will post cheers . $25,500 ono if any one thinks thats a bit dear let me know and why cheers

post-9273-1167120489.jpg

post-9273-1167120544.jpg

post-9273-1167120597.jpg

post-9273-1167120657.jpg

post-9273-1167120760.jpg

Edited by drewecrome
Link to comment
https://www.sau.com.au/forums/topic/148748-500hp-32-gts4-rb26/
Share on other sites

thanks heaps fellas yeah been doin it up for about 2 years now the head is fairly stock port and polished head new vavles pretty much every thing new and ARP head stud kit , if it didnt make 500 at the wheels then i would of done some head work but it did it pretty easy and safe so yeah . thanks

Edited by drewecrome

Hey Just a few questions

*What year is the car?

*Why was the motor built here but then sent to Japan for install?

*Could you post some interior pics?

*Why are you selling?

*Do you have any standard body parts? (for trucking, wouldnt want that kit getting fu**ed)

*At what RPM does the turbo begin to spool and what RPM does it hit full boost?

*Do the Feds hassle you much?

*When you dyno'd at 507HP at 21PSI, was that in 2WD or 4WD

*Do you have a 4WD/RWD switch installed?

*Are the brakes stock?

*What power are you making off wastegate PSI? (13PSI, and is that what you run for daily driving?)

Cheers

Hey man,

interested in a trade for a S14a, It is the X fiber motive show car. Harlequin paint, leather & Suede everywhere, buckets etc.

If you are interested please let me know trough a PM

Thanks, jake

Here a link to check car out if you prefer

http://www.nissansilvia.com/forums/index.p...=0#entry2822364

Edited by jakegts

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...