Jump to content
SAU Community

I Pod In 32

R32Big_boy

By R32Big_boy,
in Car Audio & Electrical

 Share

Recommended Posts

R32Big_boy Veteran

R32Big_boy

Posted
Posted

Hi

So my 32 has a sony head unit, with a cd stacker cable in as well as L & R channel inputs. I have used my old cd stacker which is now in the bin because it is a busted pos, and had audio pluged into the i pod, this worked but because there was no cd's in the stacker, or because it was just plain stuffed the head unit needed to be reset all the time. My question is this, should i just get another crappy cd stacker and trick the head unit again? I dont really want to get those i trips beacuse they lose sound quality. Any suggestions??

Link to comment
https://www.sau.com.au/forums/topic/149093-i-pod-in-32/
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted
See i have pluged it into the aux input, and the head unit wont register that there is anything coming in.

Head unit is a CDX CA850 or something like that i believe.

Cheers,

are you sure you are not using the bus audio input?

there is a box called a XA107 that will help you. thats the sony aux in unit.

Link to comment
https://www.sau.com.au/forums/topic/149093-i-pod-in-32/#findComment-2782925
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
×
×
  • Create New...