Jump to content
SAU Community

Recommended Posts

I have a set of 16" r33/s14 standard rims with 205/55 tyres, 2 are about 50% tread, the other 2 are pretty worn not road worthy. Looking for about $250 or throw me an offer, also have the wheel nuts to go with them, and will get some pics up 2morrow but i think we all know wat they look like, if you want some hi res detailed pics let me know, and ill put em up.

like all wheels that are 10+ yrs old they have some gutter rash but nothin major

also these wheels are located in port macquarie, nsw which is about 4 1/2 hrs drive north of sydney on the coast, and i can arrange courier delivery if needed at extra cost to the buyer

contact: 0407217325 or [email protected]

post-24767-1167479290.jpg

Edited by Satanic_R33
mate ill take the 2 good ones for $100.00 and ill drive up and pick them up.

hey, i wouldnt say they were "good" they're probably more like 30% tread now that i look at them properly, but theyre all pretty worn on the inside, you can have all 4 of them for 150 if you like, id rather sell all 4 of them

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
    • No, you're wrong, and you've always been wrong about this. The Nismo has 2 sets of openings. One is a real 2-way, and the other is a 1-way. There is no 1.5-way possible with the ramps that they offer. A real 1.5-way does exist. That Cusco stuff I posted is a prime example. If the forward drive ramps are, say 55°, and the overrun ramps are, say, 30°, then you will get about half as much LSD effect on overrun than you do on drive. It is real, it realy works. OK, you're slightly right. The Nismo has 55° and 45° ramps on the 2-way, so it does offer less LSD effect on overrun. But, I think that just means that they've (probably) sensibly established that you do not want actually equal LSD effect on overrun. You just want "quite a lot, but not quite as much as the drive LSD effect".
    • Just wanted to unearth this and post my baby with the new front ❤️😝 Took her to my wedding rehearsal today. Next up is getting wide skirts (after wedding)
×
×
  • Create New...