Jump to content
SAU Community

Recommended Posts

Howdy,

reading the thread on hombrew in the japanese section

linky : http://www.skylinesaustralia.com/forums/in...143553&st=0

got me thinking of laying down another batch of beer. Anyone here got brands / types that they like better than others?

Im looking for a lighter beer this time, so i can enjoy a few without being a cheap date :):(

Thinking of maybe trying the Japanese ones listed in the thread i mentioned too...

My birthdays coming round soon, so i think its time i laid the foundations for my own whiskey still :P

Link to comment
https://www.sau.com.au/forums/topic/149358-homebrew/
Share on other sites

The cost is in getting a quality refulx still (I didnt want to trust a home made job, but in principal they are simple enough)

You can sometimes find them on ebay and the traiding post, but I bought my whole set new for around $300 I think, but the bigger sets that can distill 25L are about an extra $200.

If you are a spirit drinker they can pay for themselves in a very short time. (1.125L Vodka $6 - this is one of the cheapest, but eern the Liquers are about $15)

Link to comment
https://www.sau.com.au/forums/topic/149358-homebrew/#findComment-2785219
Share on other sites

cool :( Found a few designs on the web for different still types, but yes i like the idea of going relfux type. 1 pass only is all i could take i think....(the faster the better) :P

Does anyone have any empty long necks beer bottles they wanna part with for a small fee?

I need (for 1 batch) about 30 of them. So its time to start buying the longies :)

Link to comment
https://www.sau.com.au/forums/topic/149358-homebrew/#findComment-2785367
Share on other sites

Ive done a few batches and if you do thngs right the brewhas can come out tasting as good as somehting you'd buy and if not better if you've done well!

I do my buying from The Jovial Monk - in Duthy Street, Parkside (think that;s right), good prices and good advice. He's got brand new 640ml bottles, think @ $1 each....I grabbed a sweet 30 last time. If you keep using them they dont end up costing much in the long run, plus then you dont have to worry so much about cracks in old glass...

Link to comment
https://www.sau.com.au/forums/topic/149358-homebrew/#findComment-2785413
Share on other sites

I might be able to help with some long necks. I'd only have a few personally but two of my mates tend to buy them and I know they haven't returned the empties for some time now. I'll ask next time I speak with them. How many do you want?

Link to comment
https://www.sau.com.au/forums/topic/149358-homebrew/#findComment-2785414
Share on other sites

Just spoke to a mate who works for the malting place that supplies Coopers, Heineken etc all the malts that they use to make the beer.

He said i can get some 50kg bags of malt ready to make my own wort for brewing.

Can anyone say bulk brews :)

The malt is only a small part of the process, and the easiest to get.

The yeasts, water, temperatures and other bits added to the wort etc are all critical to the final flavour. (but 50kg of malted barley will be a good start for lots of nice beer)

PS Heineken is from the Nederlands, so I doubt they source malt from SA, but Coopers certainly did.

Link to comment
https://www.sau.com.au/forums/topic/149358-homebrew/#findComment-2785972
Share on other sites

They export malt world wide, and he did tell me Heineken among the places they ship to.

Im still doing the research on how to make my own wort properly and yer its a long process with getting temps right.

Im off to the brew shop tomorrow to have a chat, and check out my options there as well :)

Coopers almost own the malting place now -

We own 75 percent of the Adelaide Malting Company. It supplies Coopers but also it's now the third biggest maltster in Australia. It is also the number one supplier of malt barley to Heineken and Carlsberg in Asia.

link - http://www.safoodcentre.com/buyershub/a8_p...owcasingcoopers

as well as that place, they also work along side Joe white malting

Edited by Bl4cK32
Link to comment
https://www.sau.com.au/forums/topic/149358-homebrew/#findComment-2785986
Share on other sites

Yup, he mentioned they sold out a while back (ive seen his uniform change 2 or 3 times since hes worked there for over 6/7 years now)

Just looking at the book me mate lent me now -

Home Brewing in Australia (by Laurie Strachan) - great book by the way, as its local...

It explains thing in great detail, and it appears i need about a 8-9 Lt pot to boil the malt / hops in + something to strain it into the fermenter.

Funnily enough they recommend culturing your yeast from Coopers sparkling ale / pale ale / extra stout and using that as a liquid yeast for better results....

I think the kitchen will be the first try (with extraction fans running) until im booted out by the mrs :laugh:

Link to comment
https://www.sau.com.au/forums/topic/149358-homebrew/#findComment-2786062
Share on other sites

We strain it through a stocking (cheap and easy)

Looks like you will have to buy a carton of coopers just to get some yeast - Lifes tough.

You may want to wait for some cooler weather (April perhaps) as I believe Coopers ferment at quite low temps for Sparkling and Pale. Whilst the yeast may work at 25 degrees the taste will be different to a beer brewed at 16 degrees. One of my mates set up a fridge and fiddled with the thermostat settings so that he could brew beers in much cloder temps.

Did you know Coopers are offering tours through their factory. You can see the whole process and taste the end products.

Link to comment
https://www.sau.com.au/forums/topic/149358-homebrew/#findComment-2786397
Share on other sites

lol...yep. Suggested in the book that an old stocking is the way to go. Ill get the mrs to buy me some, so i dont get the weird looks :huh:

Ive got a room here at home which is suprisingly always cold (a family member passed away in it). Pretty eerie, but makes for a good constant temperature. Ive also got ducted reverse cycle, so i can choose the room i want and set it for say 23 degrees if it gets too hot :laugh:

Whats your favourites 4door? Brewed anything other than Coopers kit ones? Im thinking of trying the Crown ale kit then a Japanese (Kirin), followed by some Kilkenny Cream style ones.

If i get through those, i will start with the experimenting with the malt my mate can get, and honey etc...

Link to comment
https://www.sau.com.au/forums/topic/149358-homebrew/#findComment-2786529
Share on other sites

I didnt tend to use the kit beers too much (started that way then went into making my own of varying styles)

Experimented with a variety of yeasts, temperatures, and differing amounts/types of Hops, even Vanilla pods in the wort. I wouldt'n make the same brew twice as I would end up with too much. If you brew one after another after another (so that I could store them - never drink them under 3 months old) you end up with large quantities.

3 friends and I chipped in together and bought a pallet of bottles from down on Port Rd (green bottles but they were press tops rather than screw tops and quite thick glass).

Link to comment
https://www.sau.com.au/forums/topic/149358-homebrew/#findComment-2786927
Share on other sites

thanks fer the tips ;

Adz, which recyclers is that as i think my local doesnt want to sell any ;)

edit/ just rang the next closest place to me, and they sell long necks for 15c each which is about $4.50 for 30 of em.

Thats pretty good, but make sure u are getting the Pop top kind, its hard to seal the bottles without it. wprk for the scout recycling centres. we have 8 yards so depending where u live to which one is closest. but the Yard at Port Adelaide always has a few

Link to comment
https://www.sau.com.au/forums/topic/149358-homebrew/#findComment-2787127
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...