Jump to content
SAU Community

Recommended Posts

Hey Dude/ettes,

Bought some stuff from Japan and a 2nd hand R33-GTR fuel pump was included which was a bonus.

Now i have it, all hoses have been chopped off, which is fine.

It's just the bare unit.

The side with 2 holes (both with threads i think), 1 hole you can see a black plastic pin hanging there.

If i shake the pump, i can hear something loose but can tell if it's that pin.

Does this sound normal to people in the know?

If this thing is all good, it's gunna save me another $200 so i would like to use it and I'm only heading for 250rwkws so it's well up to the task.

Can i somehow wire it up (not in the car) on a bench somehow and test it?

Thanks

Birnie

Link to comment
https://www.sau.com.au/forums/topic/149748-gtr-fuel-pump/
Share on other sites

Birnie, I just took my original R33 GTR one out of the box that my new nismo pump came in before fitting and with a fair shake it has a dull heavy clunk like motor windings moving inside the armature. Having said that it was working fine. I replaced the pump because of additional fuel requirements after upgrading other parts, PFC injectors, exhaust, pods etc.

Edited by sparkmanv11
Link to comment
https://www.sau.com.au/forums/topic/149748-gtr-fuel-pump/#findComment-2801318
Share on other sites

  • 1 year later...

the r32 gtr pump i bought (2nd hand) didn't make a rattle. it's being installed at my mechanic as we speak, just hope it's still good, supposedly had 20K on it.

were you still funning the standard fp with your 2535? :rolleyes:

and didn't you have s15 injectors already??

as for bench testing i have nfi

Link to comment
https://www.sau.com.au/forums/topic/149748-gtr-fuel-pump/#findComment-3577396
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...