Jump to content
SAU Community

Recommended Posts

Can't believe he didn't just close this thread...

All computers have slightly different specs. It doesn't really matter that much it would seem. No one ECU has ever stood out as a better performer than the others.

I wouldn't normally dable in a ECU war thread these days as they turn out pointless in all cases, but I thought I'd take this opportunity to discuss E-Manage Ultimate.

E-Manage ultimate was brought to my attention a little while ago ...

If keeping the stock ECU is an option ( as usually is, only if an engine conversion goes down, it may not be ) then the E-Manage ultimate gives the you ignition and injector control.

It DOES NOT appear to work the same as SAFC. SAFC only changes the input into the AFM sensor going to the ECU. E-Manage Ultimate appeared to change the output going to the injectors and the ignition. This means you do have fair greater control and in my opinion, enough control. It also has the ability to use a MAP sensor.

This means it has the same abilities ( when coupled with a stock ECU ) as a true fully programmable ECU, except, it doesn't need a base map. This means its more universal and tuning should be easier.

For around $600 the basic unit is cheaper than the others as it should be, being a piggy back. With a plug in adaptor, its around $750 perhaps?

It does have timing and fuel map full control tho, so its nothing like SAFC or SAFC NEO. Its a clever way of doing what the stand alone ECU's already do ( for most people. as most people do have a stock ECU they are upgrading from, which gets thrown out or left in the car to take car of fuel pump relay or little jobs like that. )

At the end of the day, I'll always remain a "Follow tuners advice" man. However, this new e-manage is a little exciting as it seems to have the goods at a decent price.

A lot of people are scared of the e-manage, I just can't see why...a chimp could program it. I tuned my last car with it when so many other people threw their hands up in the air.

It's so logical it's not funny...need less fuel then reduce the AFM voltage for the given grid point, need more fuel add a percentage extra to the given grid point. Need more timing add extra degrees, need less minus degrees.

I'm talking about the e-Manage ultimate. Not the first one, which is cheaper and I haven't researched.

Sounds like, from what Dan666 says, it works like the SAFC. Where as the Ultimate has greater control from what I can see.

cookiebear - I haven't ever researched the uni chip, although I know alot of WRX's use it, possibly due to MRT seeming to use it alot.

e-Manage Ultimate is a fair bit different in what it can do from the e-Manage Blue from what I have been able to find out so far.

E-manage blue intercepts, but still has a great range of control over timing and injection..with the boost sensor it is extremely good.

I haven't played with the ultimate yet, so I'm not sure what logic it uses to get around the speed cuts etc etc, needless to say it hooks up to a lot more ECU inputs than the blue. It allows individual control over injectors and timing per cylinder..which is pretty good for a piggy-back.

I'm currently using a bikirom though (daughterboard) for full control of the factory ECU

The blue is perfectly capable of getting you over 250rwkw, the ulitmate gives a few extra wank features that you may never use. One good feature though is the 'self-tune' which attempts to steer your AFR to whatever you input, it then adjusts fuel delivery to match...very cool if you can get it running correctly with a permanently fixed wideband O2 sensor. :D

Agree on the self-tune... not much point for everyday users there.

However, you say that the blue controls timing and fuel maps... does it only do this by altering the AFM input signal? Or does it actually send signal out to the injectors and ignitors as does the Ultimate?

If its the former, then I'd suggest there is alot more reasons to go for the Ultimate, leave self-tune aside... actually controlling the timing directly and injectors directly is a big advantage.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...