Jump to content
SAU Community

Recommended Posts

I've got a rb25de non nvcs for sale $800 PM me

comes with:

*throttle body, intake plenum

*injectors, rail, regulator

*camgears, camshafts, valves, valve springs

*cam angle sensor

*coilpacks, loom and igniter

*rb25de manifold

the rb25de head has more agressive camshafts than the rb25det, only difference is the sofer valve springs, I can include some rb26dett valve springs andalso can include rb25de pistons, will give 10.5 compressionratio $100 extra to buyer of the rb25de head

the head has a wiring loom,but it has been severed see pics, needs a new loom or if you find a severed one you could re-attach it , a severed one would be dirt cheap if not free

low km import 56,000km

it does not have nissan valve timing, so you can get a set of adjustable cam gears and see them, rb25 with nvcs has the crank angle sensor and the nvcs blocking them from sight, pictures will explain what i'm talking about

no modification is necessary to the rb30 block or no extra oil line needed for this, straight bolt -on

please note: rb26 clear cam cover needs the backing plate to be cut, all holes and bolts line up little cutting required on some of the corners

*blots not included for rb26 cam cover, i need them for another car

same head as this one http://users.tpg.com.au/cobra30/twincam.htm but costs less

***************************

i also have these guages for $150 for the 3, they are japanese

2 omoni guages, water temp and oil temp with senders

1 battle club boost guage with wiring

q45 afm biggest afm for nissan made by jecs japan - $200

or if you want to go non turbo i can get a rb30 with extractors, extractors would need modification to suit a rb25 head -$400

let me know what parts you want by PM, email

post-25554-1168061114.jpg

post-25554-1168061184.jpg

post-25554-1168061254.jpg

post-25554-1168061330.jpg

post-25554-1168061404.jpg

post-25554-1168061477.jpg

post-25554-1168061555.jpg

post-25554-1168061625.jpg

post-25554-1168061700.jpg

post-25554-1168061794.jpg

post-25554-1168061981.jpg

hi every one

the rb25de came off a r32 non nvcs straight bolt on to rb30e

also i will include the rb25de water pump and oil pump, but the catch is you have to remove it from the rb25de block, the gear to run the timing belt on the cranshaft is stuck on there really tight would need a breaker bar or special tool to remove

thanks, josh

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...