Jump to content
SAU Community

Recommended Posts

Hey peoples

Another day... Another issue with my car...

I own a 1993 R33 Skyline GTST with the RB25DET

Ok in the last 3 days, i've completely redone my interior and my engine, dropped it in, bolted everything back together, ran all new hoses etc etc. It looks mint. haha. Replaced all oils, coolant, power steering fluid, brake fluid, gearbox oil, bleed the brakes, everything.

Today was the day to kick it over 4 the first time. These were my problems:

Problem 1: kept blowing a fuse.

Reason: Z32 AFM was connected up wrong

Issue: Resolved...

Problem 2: Car wont kick over

Reason: The Apexi Power FC (with HC)

I tried it with the stock ecu, car kicked over fine, sounded great.

didn't drive, just let it purr.

I thought maybe that my apexi power fc and hc were stuffed, but they are brand new, so i plugged it into my mates r33 and it worked fine, but for wat ever reason i can't get it to kick over in mine.

My assumption is that its not get enough power to the power fc.

I read on an faq that some r33's for watever reason run half gauge wiring to the ecu

which is fine 4 the standard ecu, but not enough for the fc.

If theres anyone who has experienced similar problems like this, any help u could give would be massively

appreciated. Or better yet, if anyone is in melbourne and could offer a hand to help get it started that would be sensational.

If u would like to contact me via mobile, my number is 0419 15 45 15

Otherwise i usually jump onto sau at least once a day haha.

Thanks heaps everyone...

Guesty (simon)

Link to comment
https://www.sau.com.au/forums/topic/150404-power-fc-aaarrggghhh-hehe/
Share on other sites

from the faq:

My car won't start when I plug in the PowerFC, but the stock ecu works fine

First when dealing with a new PowerFC install and the car does not start there are a few basics to check;

# Check the PowerFC to car loom connector

# Check the warning lights on the dash, do they come up?

# On the hand controller, goto ETC, SENSOR SW CHECK, are any sensors highlighted in black? (Shouldn't be)

# Make sure you disable the Boost Control Kit if you aren't using it

# Make sure you have the right airflow meter selected (if you have a non standard one)

# Make sure you have correct injector settings (if you have non standard ones)

# Check all fuses

# Listen for clicking relays

# Check for burning smells near the ECU and or inside the ECU

# Inspect the ECU itself for physical damage or burn marks (open it up)

Finally we have seen on a few skylines that the car works fine with the stock ecu but not the with PowerFC. It has been traced back to a missing fuse. The missing fuse is on the left side in the R33 GTST and its at position #7. According to the diagram it is Engine Control. Somehow the stock ecu works if this fuse is missing but the PowerFC doesn't

See the diagram here for "Engine Control" which is a 10AMP fuse.

use a multi-meter, find which side of ecu is low on voltage, run new power to the ecu from fuse box in engine bay - its on ign switch.

Im sure you can find the rb25 pinout on here some were.

altho I have a question,

Does the H/C display anything with just the ignition on, and does the lights on dash work?

Ok when the ecu was in my mates r33, the hc was fully functional

when it was in mine, the hc kinda froze with the apexi symbol on the screen

Not sure if that means anything, i cant get to the menu in my car

quote name='cameron' date='7 Jan 2007, 06:41 PM' post='2800992']

use a multi-meter, find which side of ecu is low on voltage, run new power to the ecu from fuse box in engine bay - its on ign switch.

Im sure you can find the rb25 pinout on here some were.

altho I have a question,

Does the H/C display anything with just the ignition on, and does the lights on dash work?

Finally we have seen on a few skylines that the car works fine with the stock ecu but not the with PowerFC. It has been traced back to a missing fuse. The missing fuse is on the left side in the R33 GTST and its at position #7. According to the diagram it is Engine Control. Somehow the stock ecu works if this fuse is missing but the PowerFC doesn't

See the diagram here for "Engine Control" which is a 10AMP fuse.

Mint, i tried this theory, was missing the fuse, now it kicks over.

hc works perfectly, car started.

The idoling was a bit crazy at first but the longer i leave it, it seems to be tuning itself.

its settling down and becoming calm

is it supposed to?

wat do i do know basically?

the problem you had and what to do once it starts it covered in the faq

read the install procedure in it. covers everything to do and what to check once it starts and idles as well, also covers the self learn idle procedure

On the hand controller, goto ETC, SENSOR SW CHECK, are any sensors highlighted in black? (Shouldn't be)

Hey bud

i checked this, there was one thing highlight black

boost i think?

wat do i do about this.

the car seems to wanna stall now when i started it

the idle is all over the place

its in the faq, keep reading

i've been reading the faq, and attempting to follow it, but my car seems to stall everytime i try the self learning process.

i get to like 1 minute then it just dies, wtf? lol

am i better off just getting a dyno tuner to fix it

wat sort of price would i be looking at?

i've been reading the faq, and attempting to follow it, but my car seems to stall everytime i try the self learning process.

i get to like 1 minute then it just dies, wtf? lol

am i better off just getting a dyno tuner to fix it

wat sort of price would i be looking at?

is the power fc boost control kit connected?

using different boost control?

turn off boost control in the power fc menu.

No there is a setting in the menu for the power fc's own boost control kit.

this needs to be turned off if your not using it. i beleive it will make the car stall. which it did when i put a power fc into my gti-r

No there is a setting in the menu for the power fc's own boost control kit.

this needs to be turned off if your not using it. i beleive it will make the car stall. which it did when i put a power fc into my gti-r

just turned it off and it still stalls?

read the FAQ again, it covers why it may insta-stall each time.

make sure the AFM is set properly

you need to do the self idle learn procedure again and follow the instructions (again in the FAQ) and do the complete procedure, and don't short skip it. be sure to test it before you say "ok its done"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...