Jump to content
SAU Community

need some advice about my r33


Recommended Posts

Guest bigraver

hey guys,

im new to this site and just recently picked up my r33 gtst and it feels pretty bloody good.

im still waiting on compliance plates b4 u can get RWC and rego but im already thinking about mods.

i just wanted to know if any of u guys can give me some advice about mods, namely bodykits and 17-18"ers. Ive only got a year left on my P plates and dont want to be pulled up for having anything im not supposed to. i already was pulled up driving it home from the compliace place.

anyway enough rambling...if anyone can help me out id be greatful

Link to comment
https://www.sau.com.au/forums/topic/15075-need-some-advice-about-my-r33/
Share on other sites

its really all to ur own taste i mean some people will say get big ass chrome wheels, others will say wtf go get ****ed get normal human wheels, its just what u want to do, if u dont wanna be pulled over dont do anything stupid and u'll be right,

i dont know much about body mods, but i sugest you listen to a few different views as there always is...some people like to talk out of their ass and just spin shit just to sound like they know a lot, whereas some people actually know stuff!...do your reseach and save the heartache of doing things straight away.

police tend to pick on skylines that are noticably moded, and with P's, you're probably asking for trouble:(...but as dox said, it is your choice, and dont drive in a way that increases atraction

a mod that i would insist on(not loks either sorry)would be a 3" exhaust from the turbo...a cat back is good, but the bigger dump pipe does wonders for a skyline:D

Guest INASNT
Originally posted by bigraver

wheres the best place in melb to get exhausts fitted? anyone know?

First buy yourself a dump pipe with seperate pipe for wastegate and exhaust.

Dande enhaust will do you a 3inch from the dump pipe back with high flow cat for around $1200 for mild steel or $1600 for stainless steel. While doing that get the dump pipe fitted at the same time.

Thats just 1 mod, but theres sooooo many more u could do the list is endless!!

yeah i know, but i want to put a gtr bodykit on it coz ive seen them around. i just dont want to go too out of my way to be noticeable for the cops

hahahahahha sorry. i suggest if you are on your p plates you leave the mods for a while. The car is still fun stock, if you do get an exhaust dont get one wich is too loud as your trying to be as inconspicuous(???) as you can for 1 more year.

inasnt seperate pipe for wastegate and exhaust. this has to do with swirling of gases or something???, im going to purchase one of these. I am assuming it would be good to get one made up at an exhaust place. I know you got urs sent. which would be better? and what was the cost again?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
    • Sorry, just assumed that talk of coloured pads meant EBC red/green/yellow/shit stuff. I don't know the DBA pads, but it's a reasonable bet that they will be OK. DBA make good stuff generally. Those 4000 series rotors I linked to are very good. I may well replace the RDA rotors I have with those when required.
    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
×
×
  • Create New...