Jump to content
SAU Community

Key For R34

TokyoTaxi
 Share

Recommended Posts

TokyoTaxi Veteran

TokyoTaxi

Posted
Posted

Hey all. Just wondering if anyone has purchased a spare key for their R34 ?

I want a spare one so I went to Mister Minute and they don't stock a suitable key ( even just the blade without the central locking buttons ). I've been to almost every key place I can think of and no joy so I went to Nissan and guess how much they quoted me for a "KEY".............

$422.35 :yes::(

OK, so it has the central locking BS in it but it doesn't even have an immobiliser built in and yet they want $422.35 for a fcuking uncut key ?!?! For that kind of money the key should be able to perform oral sex on me ( and damn well too )

And yes, R34 keys are different to R33's, R32's etc etc.

So, are there any realistic options available that you guys know of ?

Link to comment
https://www.sau.com.au/forums/topic/152063-key-for-r34/
Share on other sites
HolyEvil Community Regular

HolyEvil

Posted
Posted (edited)

I got a spare key cut at a keysmith at Chatswood Westfield basement near to the coles or woolies. Just tell them that there's no special chip or anything. Cost me 5-8 bucks if i rem correctly.

edit- for $422.35 they better take it in all 3 places and bring their hot twin sister along..

Edited by HolyEvil
Link to comment
https://www.sau.com.au/forums/topic/152063-key-for-r34/#findComment-2838123
Share on other sites
GMan Proficient

GMan

Posted
Posted
edit- for $422.35 they better take it in all 3 places and bring their hot twin sister along..

hahahahahahahahaha!!!! Nicely said..

What does those keys look like anyways..is it different from which store you get it cut from? is there any special brands or marks on them or jus plain? pic anyone?

Link to comment
https://www.sau.com.au/forums/topic/152063-key-for-r34/#findComment-2838952
Share on other sites
HolyEvil Community Regular

HolyEvil

Posted
Posted
hahahahahahahahaha!!!! Nicely said..

What does those keys look like anyways..is it different from which store you get it cut from? is there any special brands or marks on them or jus plain? pic anyone?

not sure if it's different from store to store cuz I onlt went to 1 store. On the key it says 'Edmond's" I think it's a generic key thing?

here's a picture of it, don't look good, but would look like Keira Knightly to me if I ever loose my original key.

cheers

post-32794-1169362625.jpg

Link to comment
https://www.sau.com.au/forums/topic/152063-key-for-r34/#findComment-2840017
Share on other sites
Sheng Grand Master

Sheng

Posted
Posted
Hey all. Just wondering if anyone has purchased a spare key for their R34 ?

I want a spare one so I went to Mister Minute and they don't stock a suitable key ( even just the blade without the central locking buttons ). I've been to almost every key place I can think of and no joy so I went to Nissan and guess how much they quoted me for a "KEY".............

$422.35 :):stupid:

OK, so it has the central locking BS in it but it doesn't even have an immobiliser built in and yet they want $422.35 for a fcuking uncut key ?!?! For that kind of money the key should be able to perform oral sex on me ( and damn well too )

And yes, R34 keys are different to R33's, R32's etc etc.

So, are there any realistic options available that you guys know of ?

yeah they quoted me with the similar price, then i decided just to get a spare key for the doors n stuff, then guess what, it also turns my engine on :P

just a spare door key, it does the job :P

Link to comment
https://www.sau.com.au/forums/topic/152063-key-for-r34/#findComment-2840740
Share on other sites
  • 3 years later...
G-DADDY Newbie

G-DADDY

Posted
Posted

I hear what your saying about the price of the key. I was quoted between $550 to $400 for the key unit. One option is to order the key blank blade from Alibaba.com. Ask nissan for the electrical circuit board inside the key for the central locking (cost $130). Encode it (instruction on another thread).

It's a cheaper option and it works.

Link to comment
https://www.sau.com.au/forums/topic/152063-key-for-r34/#findComment-5256419
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

only time you need a geniuine key in an R34 is if you have a GTR. the rest fo tehm work on a copy. if you want the remote entry key I can get them cheaper but they are still expensive.

Link to comment
https://www.sau.com.au/forums/topic/152063-key-for-r34/#findComment-5262489
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What should I do next to hold the head on

      By Dose Pipe Sutututu · Posted

      Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...