Jump to content
SAU Community

Recommended Posts

I called them after saying I saw their info on here.... wowers! I was most impressed by the friendly dude on the phone.

Props to him! Most pleasant phone call lately! I call suppliers for work.. so I wasn't use to it. He was even making suggestions of which tires were suitable and that the bigger size I wanted was the same price and the smaller ones! I was like... wwwoooottt!!!

I called them after saying I saw their info on here.... wowers! I was most impressed by the friendly dude on the phone.

Props to him! Most pleasant phone call lately! I call suppliers for work.. so I wasn't use to it. He was even making suggestions of which tires were suitable and that the bigger size I wanted was the same price and the smaller ones! I was like... wwwoooottt!!!

They are good guys

See Mick, he'll take care of you. let him know you got his details from the Skyline forum.

One thing - they don't alway have loads of stock - depends when they get shipments in.

I've seen the shed full of tyres, but they didn't have many matching pairs.

good luck!

Well i drive 1 hour from the westernsuburbs to clontarfe.

Called first told the guy id be there in a hour will meet up at the shop (on saturday) Get to shop person not there. Try calling mobide 5 times no answer wait for 2 hours no one turns up.

In my books that is unforgivable. IF YOUR NOT GOING TO BE THERE JUST SAY U ARE NOT INSTEAD OF LYING AND NOT TURNING UP!

I am veyr dissappointed and will never have a good thing to say about them.

I got seond hand tyre from this place

Second Hand Tyre King The

8 Rowland St SLACKS CREEK QLD 4127

255/40 R17 Pirelli P Zero (nearly 90%) almost brand new mind you...for 80 bucks a tyre.....but need to call up and wait about 1 week, then you get a good deal......

wow, I must have struck it lucky.

I've got tyres from there 3 times now (for different cars).

Once I visited and there wasn't much to stock, so I waited a few weeks until their next shipment. These guys wholesale to other tyre shops. They can get 'cleaned out' quickly as the tyre shops buy in bulk. The better tyres obviously going first.

If you don't like what you see, don't buy!

Getting the right tyre with a good amount of tread, I think the prices are great - WAY better that new tyre of the same size/brand.

I've mainly spoken to Mick, but I believe John is the owner - can't comment on his dealings

After the comments, I will be more careful!

Hope you both get things sorted!

wow, I must have stuck it lucky.

I've got tyres from there 3 times now (for different cars).

Once I visited and there wasn't much to stock, so I waited a few weeks until their next shipment. These guys wholesale to other tyre shops. They can get 'cleaned out' quickly as the tyre shops buy in bulk. The better tyres obviously going first.

If you don't like what you see, don't buy!

Getting the right tyre with a good amount of tread, I think the prices are great - WAY better that new tyre of the same size/brand.

I've mainly spoken to Mick, but I believe John is the owner - can't comment on his dealings

After the comments, I will be more careful!

Hope you both get things sorted!

Thanks for the recommendation in the first place pear, it was just my bad luck and akward timing i guess.

If he had no intention of turning up he should have jsust said so or at least had the courtesy to answer his phone and give me a bullship story. But any ways i decided i will try and get interest free on some dished apec wheels &tyre package. If that doesnt happen ill try the place at slacks creek and maybe Tyres internation again as a absolute last choice.

Cheers guys.

I have been to Treads International and they sold me defective tyres and refuse to give a refund

Defective how???

Not questioning you Lee just wondering what was wrong with them so I can look out in future...

I mean all i look at is how much tread depth is left and that the side walls are not weak and floppy...

aren't you just asking for trouble running second hand tyres?

you might aswell get re-treads

if you get great brand tyres with about 70 above tread...how could it be bad ??....at 1/5 the cost !!!..

you got to wait till the right tyre come along how ever :P

if you get great brand tyres with about 70 above tread...how could it be bad ??....at 1/5 the cost !!!..

you got to wait till the right tyre come along how ever :)

Yep tires with about70% tread for about$50-$70 bucks as apposed to new tires for $200+ . I get more use for money value out of second hand and normally if i go second hand i get a higer performance tyre that i could have afforded new any ways.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...