Jump to content
SAU Community

Recommended Posts

Errrr man... u have the bottom end listed as $4500... and the top end listed as $3300 which comes to a total of $7800 if purchased seperately.

But you want $8300 for the lot... now thats cool if thats how you wanna do it, but usually its a discount not an increase if you take the lot, thought you mighta made a boo boo somewhere.

Also im pretty sure you mean an RB30E Series 2 Block... as far as i know there was never a twin cam version of the RB30 ever released, hence the point of doing the conversion.

(plz dont think im taking a shot at you either, just thought if you fixed up those couple of errors might help ya sell it, looks like a real solid package, good luck with your sale)

Link to comment
https://www.sau.com.au/forums/topic/152746-sold/#findComment-2840868
Share on other sites

  • 2 months later...

Bottom end is sold as of last week. I still have the RB25DET top end, and have added a few more parts... so the revised list of whats available now is:

RB25DET Series 2 head with <80,000K on it, pressure tested, lightly shaved, cc'd, re-surfaced valves and cut valve seats. VVT Head.

Standard camshafts, rocker covers, lifters etc

Tomei oil restricters

87mm Tomei 1.5mm stainless steel 3 layer grommet head gasket. Lowers compression to 8.2:1

Genuine Greddy intake plenum with all the accessories.

Greddy intake and exhaust cam gears.

Polished and blue anodised billet fuel rail designed to accept 14mm injectors and adapt the Greddy side feed injectors to 14mm top feed injectors.

ARP head studs

6 x 650cc delphi low impedance injectors, 14mm to suit rail and plenum configuration mentioned above. All new.

$4500 the lot.

Link to comment
https://www.sau.com.au/forums/topic/152746-sold/#findComment-3022605
Share on other sites

I cant remember what i paid for it. I think it was about $1800 or $2000. Horsepowerinabox sell the same turbo for $2350 so i either got mine cheap, or the prices went up.

I'd accept $1800 for the GT3040R. Its specs again are 0.7/0.82, and it requires an external gate.

Edited by GTST4Newbie
Link to comment
https://www.sau.com.au/forums/topic/152746-sold/#findComment-3027661
Share on other sites

Afraid not... but I do have a brand spankin' new GT3040R 0.7/0.82 700hp garret turbo. Its still in the shipping box, never opened. That was for this engine as well...

It's a 600hp turbo (not 700hp). I have the same spec turbo on my car - good piece of kit :happy:

Good luck with the sale :(

Link to comment
https://www.sau.com.au/forums/topic/152746-sold/#findComment-3029757
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...