Jump to content
SAU Community

Recommended Posts

I often Kramer it, and In my series 1 when the fuel is low the light comes on and it tries to stall around left hand corners! the most fuel it has ever taken is 63l allowing for a comfortable 2l. Best k's ever was about 580, average is about 300.

My car seems to like V power racing, finally no pinging!

I often Kramer it, and In my series 1 when the fuel is low the light comes on and it tries to stall around left hand corners! the most fuel it has ever taken is 63l allowing for a comfortable 2l. Best k's ever was about 580, average is about 300.

My car seems to like V power racing, finally no pinging!

:P I do that in my Van, because I hate filling it up during the day. I got like 560 out of it once, but like you said, it started cutting out

Can someone confirm if the fuel light turns on when in ingnition for a R32?

Mine doesn't light up and wondering if this was a feature added into r33+ :(

I have a 93 R32 GTS-T and the fuel light does not light up when turning on the ignition.

And incase you are wondering, the fuel light in my car does work because it came on today when i parked at work, i parked on the side of the road and the road dips a lot into the ditch so the car was on an angle and the light was on. When i pulled away after work the light wasnt on and the fuel gauge rose a bit again, but regardless it had done 500km so i knew it was time to fill up, but it took 51.5lts, so it wasnt terribly low!

Edited by r32line

holy shit. 525km on the trip meter, im lucky if i get 300km. i usually get around 280km. i cant believe it sorry mate it just amazed me to see someones skyline doin that. i got mates that get around 450 max, i got a bloody dud skyline i tell ya. it does like a bat out of hell but standard injectors and computer. dont know whats going on

holy shit. 525km on the trip meter, im lucky if i get 300km. i usually get around 280km. i cant believe it sorry mate it just amazed me to see someones skyline doin that. i got mates that get around 450 max, i got a bloody dud skyline i tell ya. it does like a bat out of hell but standard injectors and computer. dont know whats going on

bet your 02 seonsor is fooked

holy shit. 525km on the trip meter, im lucky if i get 300km. i usually get around 280km. i cant believe it sorry mate it just amazed me to see someones skyline doin that. i got mates that get around 450 max, i got a bloody dud skyline i tell ya. it does like a bat out of hell but standard injectors and computer. dont know whats going on

That's pretty bad fuel consumption, something definately not right there!! I always get 10 - 11/lts per 100km and a lot of that is in busy traffic and when im not in traffic im often stretching its legs. Overall i dont drive it that hard but i certainly dont putter around! Has your consumption been like this since you got the car? Might be worth putting it on a dyno and checking the a/f ratio's etc...

It changes from orange to red >_<

I don't understand? are you saying it comes on orange when you are low, and if it gets lower then it goes red? i've only ever seen mine as an orange light.... But i have never let my fuel tank get really really low.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • THERE IS NO IAT SENSOR ON ANY SINGLE TURBO RB. And the one on an RB26 is not for "engine control" - it's really too big and too slow and is only used for over-temp alarming (as far as I can tell). Anyway, you don't have one. You want/need one for the Link, then you need to buy one, find a spot for it, and wire it in. You do know that the stock boost solenoid is not capable of "control", right? It is merely on or off, for the low boost (5 psi) and high boost (7psi), which the ECU enforces mostly based on gear. The stock solenoid is not for PWM control and is not plumbed up in a way to provide it. If you want to control boost properly, then you need a proper MAC valve. And yes, you can wire either of them direct to the ECU. Well, I assume you can - I don't know what the boost solenoid pins on the plug and play Link are capable of. They really should be as capable as any normal Link - but seeing as it is plg and play, it might be limited to stock functionality. Read the doco.   You really do just want to plug stuff together without understanding how it works, right? I can't help you there. I don't know the plug types or pinning on half the stuff you're asking about. If I had to do it I would sit down with the wiring diagrams, the car/looms and a multimeter and work out what is what.
    • Light should be a pressure switch, not a sensor.
    • The pressure light likely has a different sender to a pressure gauge, its been too long for me to remember for sure. Just have a look for another sender down near the oil filter. If you are confident in your rewired pressure sender reading correctly, you can be pretty sure it is just the dash light's sender failing, it is a pretty common thing.
    • It would be nice to see the result, but instagram is a click too far
    • That is a series 1 front end (grill, bumper, headlights). I'm not sure if you are trying to confirm if your whole car is series 1 or just the headlights, but the build date and vin# on the plaque in the engine bay would be the best reference for what it was when it left the factory (noting a lot may have changed over the years)
×
×
  • Create New...