Jump to content
SAU Community

Recommended Posts

Hey i just had a service and tune up on my rb25det new NGK Iridium plugz, oil, filters, timing belt and tune up and timing!

some how the car doesnt feel as responsive as it was before the service?? going past 3 grand turbo kicks in but not much then once i hit 5 grand, bang car pulls like a biatch??? before the power was very evened out and didnt feel much of a difference in higher revs!! any ideas guys?? it was tuned and serviced at goodyear performance mechanics?? I had a few thoughts as in timing belt might be tight and need loosing up <---- probably not likely, or the gap in the spark plugs is not right?? anybody had the same problems??? NEED HALP PLEASE

Link to comment
https://www.sau.com.au/forums/topic/153427-100k-service/
Share on other sites

its all standard!! cept for filter! it was just a mechanic at goodyear not a import tuner!!! maybe i should visit xspeed or sik em wrex in wa or something!!!! very worried! would wrong timing change the rpms the tubro kicks in at???? or even a tune!!! what do they do when they "tune it" and do the "timing"?

Link to comment
https://www.sau.com.au/forums/topic/153427-100k-service/#findComment-2854775
Share on other sites

they tuned your car with stock ecu??

Yup changing the timing will deff alter the car!!

I think the timing should be about 13-14 i think from memory.. hmm mind blank..

I say go back to that goodyear shop and ask them exactly what they did..

Go to a proper mechanic who deals with imports and tell him exactly what the goodyear ppl did..

Ask him to check the timing again.. This will only take a min or two with the gun..

ohh and post the sheet with all the stuff done to your car.. this will help also!!

Edited by siddr20
Link to comment
https://www.sau.com.au/forums/topic/153427-100k-service/#findComment-2854785
Share on other sites

as far as i know its a stock ecu! yeah doesnt say that he did the timing! says replace spark plugs, check timing, ignition components operation! i did notice over the cam cover were the timing belt it there is a white line! just over the cam sensor! does this mean he did the timing?? as i was saying before what is it they do when they TUNE IT UP?? i had a feeling i shouldnt have taken it to them!

Mind you the temp out side today was 36 or something would that make a huge difference to poweR?? i do know that the pod does get awfally hot under that bonnet!

Link to comment
https://www.sau.com.au/forums/topic/153427-100k-service/#findComment-2855054
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
    • I also got the same floor mats for a bit of extra bazzaz haha
×
×
  • Create New...