Jump to content
SAU Community

20 Inch Rims

da_line

By da_line,
in Victoria

 Share

Recommended Posts

Ronin 09 Grand Master

Ronin 09

Posted
Posted
Yes i think i will get an engineers certificate, although i am aware you can still get defected with one.

Ok here is a pic of the magna :) , please guys dont pick on me for having a magna :(

I love my skylines, but also love my children to be able to fit in the back! lol, NO smartass comments okay :P

sorry mate, just kidding. :(

LowRollaBoy Enthusiast

LowRollaBoy

Posted
Posted
You can go 2" larger in Diameter and 1" wider with the rims (iirc, it might have changed since I last looked a few years ago) so unless your Magna came with 18" rims standard, then, yes, to legally use that sized wheel, you need an engineers certificate to say that the rim size isn't doing thing like overloading the wheel bearings/suspension components/suspension geometry.

Its not rim diameter, its overall rolling diameter of the TYRE. so only 15mm increase in overal tyre diameter over the largest availble stock on the magna.. which would be ... 15" in a 55? profile.. so if by chance they make 20" tyres in 205 30's or smaller then i doubt it would be legal.

u got zinged.

TracidTrax Grand Master

TracidTrax

Posted
Posted
Hi guys, just thought someone may be able to help me, i have had the worst weekend, had my r32 defected and my magna sports, i am certainly not after sympathy, as i know it was my choice to drive these vehicles defected, anyway the magna was done for 20 inch rims, i was told that i may be able to get an engineers certificate for these? this sounds a little like bullshit* anyone have any idea if there is any truth in this ect,

probably be easier to borrow stockies or even borrow some smaller rims off some1 until u clear the defect

Jamezilla Grand Master

Jamezilla

Posted
Posted

Step 1 - rent a magna

Step 2 - swap rims

Step 3 - clear defect

Step 4 - Winnar!

Anyway - 20" rims are weaksauce. 88"s are where it's at...

2njhye0.jpg

I'm just waiting for Chingy to bust out a rhyme about having a rotational inertia greater than a ferris wheel :wave:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...