Jump to content
SAU Community

Recommended Posts

HICAS light can be effected by different: steering wheel, suspension, wheels, etc... so its probably going to be on.

I'd be more worried about compresson being even.

Some people have their turbos last for ages without problems. Some people smoke for years without problems.

Alot of people however, DO have issues with GTR's. Such as cooling and turbo problems. I had both and it was a big issue, had to sell it.

Its not just as simple as looking at the plenum to see how much paint is on there as some people say... lol.

I'd just reckon you need to be prepared to spend alot if you buy a GTR under 20k. Who knows, it might last years without a cent spent...but you'd be foolish to not be prepared for alot of drama's.

Difference with a GTR is... engines are worth a furtune if you need to replace or rebuild and so are turbo's.

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

HICAS light can be effected by different: steering wheel, suspension, wheels, etc... so its probably going to be on.

I'd be more worried about compresson being even.

Some people have their turbos last for ages without problems. Some people smoke for years without problems.

Alot of people however, DO have issues with GTR's. Such as cooling and turbo problems. I had both and it was a big issue, had to sell it.

Its not just as simple as looking at the plenum to see how much paint is on there as some people say... lol.

I'd just reckon you need to be prepared to spend alot if you buy a GTR under 20k. Who knows, it might last years without a cent spent...but you'd be foolish to not be prepared for alot of drama's.

Difference with a GTR is... engines are worth a furtune if you need to replace or rebuild and so are turbo's.

it's the 4wd light that's on!!

So you haven't bought this car yet, but you have ready access to it to see whats wrong with it?

GTR 4WD LIGHT THREAD

For $17k it can't look that good under the bonnet, like psybic says the paint on the plenum is probably all cracked and peeling :P. Ask the current owner if you can take it for a compression test, its $xxx money well spent on a car thats more than likely ready for a rebuild.

do you mean difference between the base model and vspec model or the diff between a 92 and 94 vspec ?

differences to base model are

faster atessa pro 4wd computer

brembos

17in bbs mesh rims

harder suspension

sticker on the back

many people think the vspecs 32 will be collectable as only 3000 were made . there were quite a lot more 33 vspecs

i dont know the difference between vpsec's in different years if there is any , i dont think there is . I have read that the rb26 in the 94s has some changes that appear in the 33 rb26 but their minor and that would apply to all 94s

so there arnt any engine canges as in fixing weak points etc? I am looking at buying a white 32 94 model gtr vspec with brembos etc.

So you haven't bought this car yet, but you have ready access to it to see whats wrong with it?

GTR 4WD LIGHT THREAD

For $17k it can't look that good under the bonnet, like psybic says the paint on the plenum is probably all cracked and peeling :P. Ask the current owner if you can take it for a compression test, its $xxx money well spent on a car thats more than likely ready for a rebuild.

To be honest the engine looks really really good no paint missing on the plenum it's got crome rocker covers and apparentlly hks cams. i'll post up some pics, but stupid me forgot to take pics of the engine. the car was only driving in rear wheel drive though.

So you haven't bought this car yet, but you have ready access to it to see whats wrong with it?

GTR 4WD LIGHT THREAD

For $17k it can't look that good under the bonnet, like psybic says the paint on the plenum is probably all cracked and peeling :P. Ask the current owner if you can take it for a compression test, its $xxx money well spent on a car thats more than likely ready for a rebuild.

To be honest the engine looks really really good no paint missing on the plenum it's got crome rocker covers and apparentlly hks cams. i'll post up some pics, but stupid me forgot to take pics of the engine. the car was only driving in rear wheel drive though.

by the way does any one know any places in lansvale sydney that does compression and leak down test's and how much do they usually cost??

sorry about the quality they were taken from my phone.

Cheers

anthony

post-18265-1170229675.jpg

post-18265-1170229768.jpg

post-18265-1170229807.jpg

post-18265-1170229867.jpg

post-18265-1170230019.jpg

looks quite tidy

get an inspection from a known skyline focused workshop which would include a compression test

(uas and croydon are just 2 in syd , plenty more)

if it gets good comp figures and theres no rust or accident damage then might be solid bargain

so there arnt any engine canges as in fixing weak points etc? I am looking at buying a white 32 94 model gtr vspec with brembos etc.

late model 32 changes , but none vspec specific if thats what you mean?

Edited by arkon
So really any gtr from 92 upwards is fairly good depending on condition.

I'd say more in the August 1993 and onwards :sleep:, thats when they started the Vspecs anyway.

Mine is an August 1993 model but not a Vspec, although it had an N1 ECU so maybe it was just a trial or end of a run model.

Car looks good mate

engine bay looks cleaned up for sale, whats with the FPR and why was it changed.how come the cam cover is not polished, but over all a leak down test would make me sleep better at night if i was buying it..

The fuel pressure reg is in the car cause the car still has standard injectors

and the cam cover is cromed as well.

Cheers

anthony

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...