Jump to content
SAU Community

Recommended Posts

HICAS light can be effected by different: steering wheel, suspension, wheels, etc... so its probably going to be on.

I'd be more worried about compresson being even.

Some people have their turbos last for ages without problems. Some people smoke for years without problems.

Alot of people however, DO have issues with GTR's. Such as cooling and turbo problems. I had both and it was a big issue, had to sell it.

Its not just as simple as looking at the plenum to see how much paint is on there as some people say... lol.

I'd just reckon you need to be prepared to spend alot if you buy a GTR under 20k. Who knows, it might last years without a cent spent...but you'd be foolish to not be prepared for alot of drama's.

Difference with a GTR is... engines are worth a furtune if you need to replace or rebuild and so are turbo's.

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

HICAS light can be effected by different: steering wheel, suspension, wheels, etc... so its probably going to be on.

I'd be more worried about compresson being even.

Some people have their turbos last for ages without problems. Some people smoke for years without problems.

Alot of people however, DO have issues with GTR's. Such as cooling and turbo problems. I had both and it was a big issue, had to sell it.

Its not just as simple as looking at the plenum to see how much paint is on there as some people say... lol.

I'd just reckon you need to be prepared to spend alot if you buy a GTR under 20k. Who knows, it might last years without a cent spent...but you'd be foolish to not be prepared for alot of drama's.

Difference with a GTR is... engines are worth a furtune if you need to replace or rebuild and so are turbo's.

it's the 4wd light that's on!!

So you haven't bought this car yet, but you have ready access to it to see whats wrong with it?

GTR 4WD LIGHT THREAD

For $17k it can't look that good under the bonnet, like psybic says the paint on the plenum is probably all cracked and peeling :P. Ask the current owner if you can take it for a compression test, its $xxx money well spent on a car thats more than likely ready for a rebuild.

do you mean difference between the base model and vspec model or the diff between a 92 and 94 vspec ?

differences to base model are

faster atessa pro 4wd computer

brembos

17in bbs mesh rims

harder suspension

sticker on the back

many people think the vspecs 32 will be collectable as only 3000 were made . there were quite a lot more 33 vspecs

i dont know the difference between vpsec's in different years if there is any , i dont think there is . I have read that the rb26 in the 94s has some changes that appear in the 33 rb26 but their minor and that would apply to all 94s

so there arnt any engine canges as in fixing weak points etc? I am looking at buying a white 32 94 model gtr vspec with brembos etc.

So you haven't bought this car yet, but you have ready access to it to see whats wrong with it?

GTR 4WD LIGHT THREAD

For $17k it can't look that good under the bonnet, like psybic says the paint on the plenum is probably all cracked and peeling :P. Ask the current owner if you can take it for a compression test, its $xxx money well spent on a car thats more than likely ready for a rebuild.

To be honest the engine looks really really good no paint missing on the plenum it's got crome rocker covers and apparentlly hks cams. i'll post up some pics, but stupid me forgot to take pics of the engine. the car was only driving in rear wheel drive though.

So you haven't bought this car yet, but you have ready access to it to see whats wrong with it?

GTR 4WD LIGHT THREAD

For $17k it can't look that good under the bonnet, like psybic says the paint on the plenum is probably all cracked and peeling :P. Ask the current owner if you can take it for a compression test, its $xxx money well spent on a car thats more than likely ready for a rebuild.

To be honest the engine looks really really good no paint missing on the plenum it's got crome rocker covers and apparentlly hks cams. i'll post up some pics, but stupid me forgot to take pics of the engine. the car was only driving in rear wheel drive though.

by the way does any one know any places in lansvale sydney that does compression and leak down test's and how much do they usually cost??

sorry about the quality they were taken from my phone.

Cheers

anthony

post-18265-1170229675.jpg

post-18265-1170229768.jpg

post-18265-1170229807.jpg

post-18265-1170229867.jpg

post-18265-1170230019.jpg

looks quite tidy

get an inspection from a known skyline focused workshop which would include a compression test

(uas and croydon are just 2 in syd , plenty more)

if it gets good comp figures and theres no rust or accident damage then might be solid bargain

so there arnt any engine canges as in fixing weak points etc? I am looking at buying a white 32 94 model gtr vspec with brembos etc.

late model 32 changes , but none vspec specific if thats what you mean?

Edited by arkon
So really any gtr from 92 upwards is fairly good depending on condition.

I'd say more in the August 1993 and onwards :sleep:, thats when they started the Vspecs anyway.

Mine is an August 1993 model but not a Vspec, although it had an N1 ECU so maybe it was just a trial or end of a run model.

Car looks good mate

engine bay looks cleaned up for sale, whats with the FPR and why was it changed.how come the cam cover is not polished, but over all a leak down test would make me sleep better at night if i was buying it..

The fuel pressure reg is in the car cause the car still has standard injectors

and the cam cover is cromed as well.

Cheers

anthony

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...