Jump to content
SAU Community

Recommended Posts

  • Replies 258
  • Created
  • Last Reply

Top Posters In This Topic

1) from memory state voting is on the 24th.. so maybe an idea to do that before goin to the track (no idea when voting closes)

2)i have read 90%+ of this thread, if i DONT have a friend who is racing... how much is it just for general spectator entry? or do i have to know someone to get my name on the list (NFI when im working yet)

1) from memory state voting is on the 24th.. so maybe an idea to do that before goin to the track (no idea when voting closes)

2)i have read 90%+ of this thread, if i DONT have a friend who is racing... how much is it just for general spectator entry? or do i have to know someone to get my name on the list (NFI when im working yet)

Drag day is on the 25th so no worries about voting.

You have to know someone, or ask someone on the list who is going.

anything under 15.2 my PB which was my 2nd run.

tyres are much worn that before so i gotta see what i can do about that.

i wonder who will be the slowest..... i rekon ill come close if not be the slowest... but its good we have the braket attack so i have a chance of winning.

i better hit at least a 11.99 or im sellig my car lol.. thats the deal i made with myself :)

i hit a 12.4 previously... now doing it with hi flows, boost & dump pipes! oh and a dirtgarage rwd switch to take that damn water off!!

that should do it... right?!..




  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...