Jump to content
SAU Community

Recommended Posts

I have had these for a while and they are just sitting in my cupboard.

I have both Biante Bathurst R32's, with cert. of auth - 1/18 scale - these sold out almost straight away $250ono each or $420 for both. THe 1991 model comes with a genuine driver card from that year, which is extremely rare. ****SOLD****

I have also a very rare set of R32's 1/18 scale - of Grp A HKS,Taisan,Axia and Calsonic models - I got these from the US and they cost me a fair bit - $150 ea or $500 for the whole lot ***** SOLD ****

Z-Tune GTR Sold, pending payment***

Also have blue and grey R34 GTRs, 1/18 scale - $50 ea

I also have a 1/12 scale (I think) R32 GTR model kit that I put together, it looks great. Took me a month to build. The kit alone cost me $320, I will sell this for $300, fully built

I will post up pics ASAP if anyone is keen, prices as per listing

Will post Aust wide at buyers expense

Regards, Chris

post-493-1171510661.jpg

post-493-1171510881.jpg

post-493-1171511811.jpg

post-493-1171511934.jpg

post-493-1171512084.jpg

post-493-1171512291.jpg

post-493-1171512947.jpg

post-493-1171513124.jpg

post-493-1171514834.jpg

post-493-1171515127.jpg

post-493-1171515648.jpg

Edited by Chris32
Link to comment
https://www.sau.com.au/forums/topic/155078-model-cars-118-scale-skylines/
Share on other sites

pm replied to

For everyone's info I am in Adelaide but will courier no probs. Might even include it in the prices if I can sell a few of them off together

Chris

pm sent re

1 stp r32

1 ztune r34

Hi Jeff - really want to keep the HKS,STP and Axia Skyline together as a group, as thats how they where sold and thats how I bought them

hi, i m still waiting for the pm about the ztune

cheers

The Z-Tune may be sold, but if it falls through I will let you know

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...