Jump to content
SAU Community

Recommended Posts

i have this kit for sale as sold the car and no need now.

consists of

R34 front calipers

front DBA 4000 slotted rotors 310mm less then 10000km on them

rear R32 gtr calipers with standard rotors 297mm

front and rear has near new bendix ulimate pads.

front and rear 5 stud hubs.

rear hubs are off a R33 gtst and front are off a stagea

everything fits straight up only need to get some hard brake lines made up from the standard rubber hoses to caliper.

$1500 firm. the DBA rotors where $600 alone so u are getting a good deal.

email me at [email protected]

thanks derek

post-20159-1170919944.jpgpost-20159-1170919993.jpgpost-20159-1170920048.jpg

post-20159-1170920114.jpgpost-20159-1170920184.jpgpost-20159-1170920273.jpg

Link to comment
https://www.sau.com.au/forums/topic/155485-5-stud-and-big-brake-kit-for-sale/
Share on other sites

  • 1 month later...
is everything included....like caliper mounts etc etc.....also the picture with the arms on it?? is that for rear or front?

u dont need caliper mounts as the calipers suit the discs. and the arm one is for the front.

everything is included that will all fit right on the car.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...