Jump to content
SAU Community

Recommended Posts

i recently installed interior neons wif a toggle switch i built in2 the dash and its workin gooood.

but wif the underbody neonz i wanna install i think i should get a electrician?

wat pple think ? is it simple or shold i get sum1 to do it proffesinally?

cheers

ez

Link to comment
https://www.sau.com.au/forums/topic/155489-neonz/
Share on other sites

as people said its each to there own

TRUE

but theres nothing better than seeing a sleek line on the road . IMO i would avoid the tacky stuck on look. but hey, good luck with it and post up some pics when ya done.

Link to comment
https://www.sau.com.au/forums/topic/155489-neonz/#findComment-2896053
Share on other sites

I don't understand y ppls have problems with neons, it adds to the effect when it in car show etc, rice? big subwoofers can be classified rice, Stickers? the same. BOV? people always yelling out and paying out the car cuz it sneezes so y have one? If you like neonz put em on, your choice, getting pulled over, cops choice. I'll prob put em on my car when she's all done up, just for show...won't be driving with them on.

Link to comment
https://www.sau.com.au/forums/topic/155489-neonz/#findComment-2903312
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Not really, but the heater box is pretty simple mechanically....if the door is one way the air bypasses the heater core and if it is the other way it goes through it for warm air.  If you are sure the actuator you moved manually is for the heater mix (there would also be one for output air direction) then I'd take the heater box out and see what is happening (you'll have to regass and re-coolant the systems afterwards) BTW pp724 onwards from the GTR workshop manual cover the system in good detail, it is probably worth checking. I think the IAT sensor might be a problem electrically for getting cold (if you got 24 error code not -24 it thinks the incoming air is -50c) and it covers how to test the sensor (although most likely it is either not plugged in or a wire is damaged)
    • Use the GKTech subframe bush and bring your subframe 10mm closer to the chassis. You'll need to fix an exhaust hanger to suit. One of the best mods I've done.
    • You'd really have to pull it apart further to know, it least you can be confident that the one heading to the back is not connected any more. There was once a ground on the shifter seal mount too, your head unit issue could be that simple
    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
×
×
  • Create New...