Jump to content
SAU Community

Recommended Posts

After some advise as Im in the market for a R33 GTR atm and I got some comp test results back from one seller and they seem a bit low.

Apparently the engine has only done 70,000km.

Results: 1=125, 2=125, 3=120, 4= 130, 5=125,6=120

Im not sure if this was done cold or hot. Would it make that much of a difference?

Apparently the reason for it being so low is because the car has a HKS head gasket. Does this sound right?

Will a leak down test determine correctly if the comp is too low?

Any advise is appreciated :laugh:

Link to comment
https://www.sau.com.au/forums/topic/156280-comp-test-rb26dett-only-70000-kms/
Share on other sites

After some advise as Im in the market for a R33 GTR atm and I got some comp test results back from one seller and they seem a bit low.

Apparently the engine has only done 70,000km.

Results: 1=125, 2=125, 3=120, 4= 130, 5=125,6=120

Im not sure if this was done cold or hot. Would it make that much of a difference?

Apparently the reason for it being so low is because the car has a HKS head gasket. Does this sound right?

Will a leak down test determine correctly if the comp is too low?

Any advise is appreciated >_<

A thicker h/gasket will decrease compression because the compression chamber is bigger.

Compression numbers will depend on a few things , like how it was done , warm engine, cold engine, WOT and finaly the gauge itself .

From the numbers you posted it doesn't look good because of the variance ( 3+6 =120 4= 130) I know the varaince is within Nissan specs but to great for my liking . Why use a thicker h/gasket to lower comp so much???

A leakdown test will confirm the condition of the engine, under 5% leakdown = excellent engine , above 25% = rebuild or dodgy past rebuild .

thanks guys thats very helpfull.

Is a leak down test less accurate than a comp test?

Different test, it will give you a % of cylinder leakage and you can even hear where its coming from the top end or bottom end . They are both accurate if done properly, with leakdown test it makes no difference what the comp ratio is , so even if she has a thick gasket , a good angine should have very little leakdown .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
    • Yes it is ATF. I quote @Duncan "it takes a good synthentic auto trans fluid like Castrol Transmax Z" It's not a diff. It's a transfer case. Totally different thing. Yes, fluid will come out the sender hole. No you do not really need to drain it. Just pull the old, quickly poke the new, clean up and top up. But realistically, you should probably take the opportunity to change it anyway.
×
×
  • Create New...