Jump to content
SAU Community

Recommended Posts

Hi guys,

Ive been having a really annoying problem lately with my brakes, they squeak CONSTANTLY I mean like even when their not in use the rear left squeaks as im driving along not using the brakes at all it might stop for 20 secs here and their but its very rare. I changed the pads to brand new ones and the problem was still their so I took it to the brake place and they said my discs needed machining so I got all the discs machined and all new brake pads all round. Drove out of the workshop all was fine for about 3kms and I was enjoying being able to drive without the ear piercing sound of the brakes squeeling constantly but then all of a sudden the noise came back and its been doing it constantly just like before.

Anyone got any ideas what it could be thats causing this and what I can do to fix this (I cant get it back to the brake place until Monday as they are closed now)

Link to comment
https://www.sau.com.au/forums/topic/156636-brakes-constantly-squeaking/
Share on other sites

well check your brake pads would be a good way to start to see how much meat you got left. maybe you can change to a different brand pad also because some are known to squeal. I use to have dodgy squealing ones then changed to bendix and all good now :)

Edited by LatinR33

Im fairly sure their just normal Bendix pads, the thing is they dont squeak at all when braking, its the cruising along when im not touching the brakes at all that they continuously squeak, as soon as I apply the brakes to slow down the squeeling stops.

Have you got the backing plate on the pads? If not, get some OEM nissan backing plates and install them. Often brake places will leave them out as they dont usually come with aftermarket pads.

If you do have backing plates already: get some anti brake squealing stuff from repco. Its called "Squeal stop" or something equally as obvious. Just ask at the the counter. It's a red goo that you apply to the back of the pad to stop it vibrating. It's not a commonly known fact - the squealing sound is actually the brake pad 'rattling' at high frequency inside its housing, so adding some packing in there (backing plate) or some shock absorbing material (squeal stopping goo!) will solve your problem.

I found that the goo works well for a few months then needs re-application. Best off getting some proper backing in there (oem works fine) to provide some absorption for the annoying squeal!

Good luck :wave:

damn i was hoping the normal ones fixed it :wave:

mine do the opposite and just squeel when im coming to complete stop

Im fairly sure their just normal Bendix pads, the thing is they dont squeak at all when braking, its the cruising along when im not touching the brakes at all that they continuously squeak, as soon as I apply the brakes to slow down the squeeling stops.
Have you got the backing plate on the pads? If not, get some OEM nissan backing plates and install them. Often brake places will leave them out as they dont usually come with aftermarket pads.

If you do have backing plates already: get some anti brake squealing stuff from repco. Its called "Squeal stop" or something equally as obvious. Just ask at the the counter. It's a red goo that you apply to the back of the pad to stop it vibrating. It's not a commonly known fact - the squealing sound is actually the brake pad 'rattling' at high frequency inside its housing, so adding some packing in there (backing plate) or some shock absorbing material (squeal stopping goo!) will solve your problem.

I found that the goo works well for a few months then needs re-application. Best off getting some proper backing in there (oem works fine) to provide some absorption for the annoying squeal!

Good luck :wave:

Thanks mate ill go down to Repco tomorrow and grab some of this stuff hopefully it works :wave::(

Update:

PROBLEM FIXED!!! :)

Turned out it was the shim plate thing was rubbing along the disc constantly even though the pads were brand new, got my dad to look at it today and he solved the mystery for me, went on a nice squeak free drive after that.

Cheers to everyone who offered advice.

Hmm.. Well good to hear that you got it sorted, but i'm a little worried about what you just explained.

From the outside to inside, the order goes caliper/piston, shim plate, brake pad, rotor (disc). Theoretically if they're installed properly then the shim plate and the rotor shouldnt come close to touching because there is a chunky pad between them. Anyway, you've got the issue sorted so I guess thats all that matters! :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...