Jump to content
SAU Community

Recommended Posts

Yeah it wouldnt matter too much that they're small though, theyd be going onto my silvia, and i dont really care about looks that much, 16's arent too bad on my car. What made me interested in them was that they had an absolutely massive clearance of the skyline calipers.

Is it an old AVS T6 model perhaps? I google imaged the AVS T6 and it doesnt look exactly the same, close but different.

Offset is the distance between the mounting pad of the rim to the centerline of the rim yea? It looks like on this rim that the mounting pad was almost central (ie zero offset) but had a lot of meat on the hub that moved the spokes out and gave a lot of clearance for the calipers. Why wouldnt more rims be of that design to clear calipers?

Edited by s13silk

Yeah i understand offset. Thats showing wat i said ie "Offset is the distance between the mounting pad of the rim to the centerline of the rim"

Those TE37s look a bit like the rim i took a photo of. But its still a little different

Edited by s13silk
I saw these rims today, im interested in wat they are as they had no markings on them to identify wat they were. It was on a 32 GT-R if your wondering:

Not putting shit on your choice of Rims.....I am sure they will come out quite nice if you like spend $500

fixing them......

R32 GTR should only be wearing 2 /3 piece rims(Black inner and Polished wall) or gtr33 Rims(Black).

My2c....

Not putting shit on your choice of Rims.....I am sure they will come out quite nice if you like spend $500

fixing them......

R32 GTR should only be wearing 2 /3 piece rims(Black inner and Polished wall) or gtr33 Rims(Black).

My2c....

Actually the R32 should be wearing watever rims the owner of the car wants it to wear. These rims dont need any money spent on them, a good clean wouldnt go astray though.

I saw these ones though (enkei, not sure of model), apparently a magnesium alloy composite (or wateva thats known as) and a race only rim. Not sure if thats legit just wat the owner recons.

post-33306-1172217762.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...