Jump to content
SAU Community

Recommended Posts

Ok, im selling my Silkroad section coilovers.

they wont go low enough for me (but i guarantee they will for you. i want to tuck front and rear tires)

Springrate is a 12k front and 10k rear

Its comfy, not extremely stiff.

Im moving up to a 16k 14k setup

adn i have to mismatch all different parts to get what i want.

So someone buy these and get a slammin deal on 1400 dollar coilovers

no leaking, rust or anything, i will even coat the lowers with a fresh coat of silver to make em look like new.

These are STAGEA SPECIFIC COILOVERS

not pieced together gtr/gtst setup. it is the stagea application.

retail on used Silkroad is normally around 900.00 USD

FOr you guys, so i can try and hook someone up 750.00 USD + actual shipping price (ill let you know after they are shipped the price)

should be under 100.00 or so hopefully.

Link to comment
https://www.sau.com.au/forums/topic/156902-silkroad-rm8-coilovers/
Share on other sites

  • 2 months later...

if all you want to do is lower it, look at the whiteline group buy. or if you want it slammed, bag it. :P

if you're looking for a harder ride, and potentially better handling (depends on how it's setup of course), then yes, these would work.

pretty sure there are some guides here on swapping suspension over.. have a search

if you want it lower, with stiffer springrates

and 100% more adjustability than those whitelines, get these

if you want half ass adjustment get the whitelines.

its a direct swap

If you want to lower your car, these will achieve that, don't expect a performance gain though, for that you need to address other suspension components and adjustments. Just going low will alter suspension geometry, reduce the contact patch your tyres have with the road and increase wear on you tyres - inside edges.

Silk Road - Cool name - Full ass adjustment - cool! Is that on the shock or on your ass due to the spring rates?

is the height adjustable? we have heaps of annoying speed humps and other obstacles in my daily driving so dont want to go to low. how low can it go ? min and max?

in the front the max low is with the front bumpr 4 inches from the ground on a Dayz bumper

the rear i can drag subframe

they are all the way adjustable

Height, preload and dampning

And it WILL provide a performance adn handling advatange...extremely noticeable

i guarantee that

WHen i went from stock to this setup, i could do a lap (large circles) at almost 20KM faster than with the stock suspension before it started understeering, and now that i have my sway bars, i can go a tad faster until it starts to oversteer since im RWD now

as long as you arent too low, your stock parts will adjust to exactly what you need to achieve a good alignment as well.

If you want to lower your car, these will achieve that, don't expect a performance gain though, for that you need to address other suspension components and adjustments. Just going low will alter suspension geometry, reduce the contact patch your tyres have with the road and increase wear on you tyres - inside edges.

Silk Road - Cool name - Full ass adjustment - cool! Is that on the shock or on your ass due to the spring rates?

a 12/10 springrate isnt even stiff

before you start talking about thinkg syou dont know, put some on your car, then talk.

Ive been through a load of springrates, and found that a 16kg front and 18 rear set it up justtttt right to do what i want it to.

the 12.10 is nice comfort level with decreased body roll (but i also have cusco sway bars)

Hey Grant,

Might want to think about selling your stuff some other way than bagging out other peoples (brands) makes you look like a tool! "Buy Pepsi - Coke is shit" that was an example so you know what I am talking about...

Given the choice I know who's advice I would take, I shouldn't have to spell it out to you... Try not to get your personal preference mixed up with reality.

you are doing the same exact thing

THe facts are

Silkroads have more adjustment than the other popular option

advice is one thing, actually trying things out is another. If iw asnt able to do it, i might take advice, but i have personally tried 3 different sets of coilovers with different spring rates which led me to order the set thats on the way.

But then again, i track my car regularly (well once its finished ill do it again) so more adjustment for cornerweighting, and dampning is needed by me to dial in my balance.

Yeah you are right I haven't tried them, my only piece of criticism was:

Silk Road - Cool name - Full ass adjustment - cool! Is that on the shock or on your ass due to the spring rates?

Was actually a sarcastic poke at your comments criticising a product YOU have never tried, well the height adjustment level of it anyway. No does not reflect on the product for sale itself.

99% of people would be happy with the adjustment level on the Whitelines, not many would be thinking "just 2mm lower at the front and up 1/16th of a turn at the rear"

(note to self: Aussie sarcasm should be left out of conversations with Grant)

I think I have made enough of a mess of your "for sale" thread now so I'll piss off and leave you to it, you do encourage it though...

Cheers

Luke

oh but i HAVE tried a height only adjustable setup, Ground control with KYB AGX, it was a few years back, but defff didnt like it

But this is for the people that are thinking 2mm lowe in the front 1/16th turn in the rear

i guess im one of the few stagea people that care about it.

You got any pics of these coilovers?

if i can see they are in good nick i might be inclined to make an "offer"

and ill need a deffinate price for shipping to my front door.

well, as soon as i get them off the car, when my new ones get here (they werent the package like i thought they would be) ill clean them up and get pics up as soon as i can

but for now, this is what they are

http://www.silkroad-jp.com/section/a8.html

and there isnt relaly going to be an offer lower than 650.00 they are twice that new.

keep em then.

"well, as soon as i get them off the car, when my new ones get here (they werent the package like i thought they would be) ill clean them up "

i wanted to see them with out you cleaning them up, visual inspection only works if they havn't been made to look better then what they are.

"and there isnt relaly going to be an offer lower than 650.00 they are twice that new"

they are not new.

average depreciation on a used coilover is 40%

look at yahoo auctions japan

smarten up...i sell parts to the states on a daily bases.

its ok, because a serious tuner would know the advantage of these coilovers....and i hope they end up in teh hands of someone that will, instead of a lowballer.

keep em then.

"well, as soon as i get them off the car, when my new ones get here (they werent the package like i thought they would be) ill clean them up "

i wanted to see them with out you cleaning them up, visual inspection only works if they havn't been made to look better then what they are.

"and there isnt relaly going to be an offer lower than 650.00 they are twice that new"

they are not new.

i think that was a fair call

average depreciation on a used coilover is 40%

look at yahoo auctions japan

smarten up...i sell parts to the states on a daily bases.

its ok, because a serious tuner would know the advantage of these coilovers....and i hope they end up in teh hands of someone that will, instead of a lowballer.

ffs grant get of your high horse and stop slagging anyone who questions your opinion

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...