Jump to content
SAU Community

Recommended Posts

Just pull the fuses?
this will disable the front? if i will remove the 4wd lsd fuse??? k ill try tomorrow..

Yes if you pull the fuse you will only run in RWD, some people say its not good to do this for long periods of time for mechanical reasons, others say it doesn't make a difference. I've seen a few people run with just the fuse and not have a problem (for over 12months) yet i've seen others have dramas.

Truth is if your thinking of just trying a once off to see if you like drift then pull the fuse and give it a crack (i accept no responsibilty for anything that happen :happy: ) if you decide that you like drift and want to continue then look at getting a pig for track use or invest in a splitter for the GTR :(

GMB

pulld fuse, drain ATESSA, and pull out front prop shaft. thats the way to do it, but i advise you on a GTR its dangerous, i did it on mine and the moment my car hit boost, it basicly spun out of control and i nearly hit a lighting pole. but anyway succes with your drifting carreer

pulld fuse, drain ATESSA, and pull out front prop shaft. thats the way to do it, but i advise you on a GTR its dangerous, i did it on mine and the moment my car hit boost, it basicly spun out of control and i nearly hit a lighting pole. but anyway succes with your drifting carreer

is it ok to do it faid??? won't damage my gtr???removing the front shaft???

pulld fuse, drain ATESSA, and pull out front prop shaft. thats the way to do it, but i advise you on a GTR its dangerous, i did it on mine and the moment my car hit boost, it basicly spun out of control and i nearly hit a lighting pole. but anyway succes with your drifting carreer

as what faid is telling....so, its ok to remove the fuse only...okok...thnx

pulld fuse, drain ATESSA, and pull out front prop shaft. thats the way to do it, but i advise you on a GTR its dangerous, i did it on mine and the moment my car hit boost, it basicly spun out of control and i nearly hit a lighting pole. but anyway succes with your drifting carreer

nar mate :(

ok. if its a 33 you shouldnt pull the fuse coz the transfer case is pre-loaded and youl burn out the clutches.

r32's you can because there is no preload on it. also on all the part where the shaft goes into is sealed so you wont get oil coming out :)

draining the oil from the transfer case is the most retarded thing ive ever heard. whats going to keep the chain and bearings lubricated?

nar mate :D

ok. if its a 33 you shouldnt pull the fuse coz the transfer case is pre-loaded and youl burn out the clutches.

r32's you can because there is no preload on it. also on all the part where the shaft goes into is sealed so you wont get oil coming out ;)

draining the oil from the transfer case is the most retarded thing ive ever heard. whats going to keep the chain and bearings lubricated?

i tried removing my propeller already...the gear oil won't come out...i think its ok not to drain it....im just finding ways to cover the hole so foreign objects cannot enter...

the front driveshaft hole is sealed anyway so dont worry about anything entering the tf case.

pull the shaft and u dont need to touch any fuses/fluid etc, i drove mine for about 3000km with no shaft and just tuned on 550rwhp and i had to put the front shaft in because it just wont hook up on the street lol :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...