Jump to content
SAU Community

Recommended Posts

G'day

Mate of mine took me for a strap in his R32 GTS-T tonight and it has some serious issues. I am not an expert on the Nissan engines but when this thing hit 4 grand it felt terrible. It has a pod filter, exhaust and blow off valve, the turbo was boosting somewhat (as it would vent via the blow off valve) but the car went nowhere. It also keeps displaying a warning light on the dash, we are pretty sure it might be an exhaust gas temp warning light? looks to be roughly 2nd warning light in from the right. light will also randomly show at idle, always flashes under load.

is the sensor stuffed causing ECU to pull fuel/retard timing under boost, or does it sound like the turbo is stuffed? History of car is unknown, its a recent import

many thanks

Link to comment
https://www.sau.com.au/forums/topic/157772-r32-issues/
Share on other sites

G'day

Mate of mine took me for a strap in his R32 GTS-T tonight and it has some serious issues. I am not an expert on the Nissan engines but when this thing hit 4 grand it felt terrible. It has a pod filter, exhaust and blow off valve, the turbo was boosting somewhat (as it would vent via the blow off valve) but the car went nowhere. It also keeps displaying a warning light on the dash, we are pretty sure it might be an exhaust gas temp warning light? looks to be roughly 2nd warning light in from the right. light will also randomly show at idle, always flashes under load.

is the sensor stuffed causing ECU to pull fuel/retard timing under boost, or does it sound like the turbo is stuffed? History of car is unknown, its a recent import

many thanks

dude i got a similar prob but no warning light appears.

mods are:

catbak exhaust, pod and bov

ever since my manual bst controller was installed car running shit and wierd noise appears from the exhaust

the car doesnt really pull anymore above 4g but my boost guage is showing .7 bar then droppin...

Link to comment
https://www.sau.com.au/forums/topic/157772-r32-issues/#findComment-2931717
Share on other sites

people seem to think that there might be a leak in the boost controller installation because its only happened ever since it was installed.

might sound confusing but last night i took for a spin and wen i flat foot it from the start it shows full boost to .7bar then drops 2 .6bar and it climbs in the rev range slow (1st and 2nd gear)

but if i was 2 put my foot down 3 quarters of the way until it hits 5000rpm then flat foot it, it runs perfect.

so in other words in only happens wen my foot is all the way dwn startin from 3500rpm.

confusing yeah lol i dont know whats happening....

Link to comment
https://www.sau.com.au/forums/topic/157772-r32-issues/#findComment-2932803
Share on other sites

regarding my mates car, its like its not boosting at all. It feels terribly slow. My EL XR6 would whip it

i suppose all he can do really is get a new cat and take it to someone who knows what to look for. This car has definately been messed with, there is evidence of an old boost controller being installed (no longer there) and we basically have no idea where to start.

Link to comment
https://www.sau.com.au/forums/topic/157772-r32-issues/#findComment-2933239
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
×
×
  • Create New...