Jump to content
SAU Community

Annual Sau Dyno Day Pictures/video And Discussion


Recommended Posts

  • Replies 140
  • Created
  • Last Reply

Top Posters In This Topic

Sounded like a great day, Some nice liners out there! I wish i could have came along =[

Theres always next time!

josh.

p.s

that shirt hahaha

"Swallow, Or its going in your eye" :P

Edited by OBNXSH
no col i want it now.. joking buddy.. :)

good stuff sau.. did andy melt something? :no:

Yeah it was hella funny!!!

hha was that lees S13.. what did that pull? :P

180rwkw... Not bad for a two bit skyline wanta be... :rofl:

good stuff sau.. did andy melt something? :P

Every track day and dyno my rear bar gets a little more melted it is no biggy because it is smashed anyway and needs replacing...just a shame that big bird copped it this time :) He has survived a track day and a dyno day but for some reason this time he got owned

I dunno, I guess i viewed this day different to some peeps. I went there to see some fine lines and hang with liners. What happenned at the dyno was simply the medium that gets people of a similar nature together. WTF do you want for 40 bucks. Heck it was worth more than that just for the entertainment value alone. And dont forget the free sausage sizzle lunch and cold drink to members.

The day I am paying a tuner 100 to 200 clams an hour to tune my car I will be the most critical person on the planet but for days like this if you saw it as anything more than fun you were there for the wrong reason imo.

Bah talk about topic change from discussion to flaming

Agreed, thread cleaned of needless info...

Please stick to the topic, of sharing photos/video and good times...

Problem with something then PM me, Warrick and I seem to understand each other so im sure i can reason with anyone...

Not to say Warrick is un-reasonable, just saying we were able to see each others point.

If you have an issue please PM me so we can sort it out for next time to improve the unofficial may dyno night...

Heads up tho; At this stage the unofficial host (for may) will be Mercury Motorsport as they have a 4wd "Dyno Dynamics" dyno which is want everyone has requested. I mean to say we need a 4wd one this time and most have asked for it to be a dyno dynamics unit. So Mercury fits that bill. However in saying that we have a few issues to over come with them in terms of Noise and Price. But its in May so Ive got heaps of time to sort it out...

We have not used Mercury for over 2 years and im sure they will want us back...

Who owned that white 33 with the bomex/veilside looking kit with the nose off? That was the most incredible engine sound i've ever heard, and i'm not even into cars that much.

Seriously wow :P

That was SirSkyline - Jarrad

Oh oh this is one for those techys out there the guy who ran 249rwkws, in a bone stock r33 gtst, only mods diff were exhaust trust cooler and hks 2540 turbo :P And yes stock bottom, stock head, Stock injectors, and oh i forgot stock r33 airflow meter, only dif running a regulator with it.

One big big noticable difference were the big fat drag radials it had on there and oh running 1.2 i think bar pressure. and afrs were everywhere dipping in to low 11s to 10s in some spot

Come on come on someone explain this please :)

We saying here well if i and col were to run big fat drag radials our readings would be higher due too better traction, its really got me thinking on this one, as i was running 38psi on stocko 205/16s with well 2mm off tread indicators.

This one is for Col, could you pm me your details of just your turbo, exduce induce trim and inlet outlet and a/r (Hot Side) just would like to compare to mine please Thanks In Advance

Cheers A

this is my mate simon's car, it has all that u mentioned but it has bigger injectors and fuel pump to match etc he had semmi race slicks off race car on the rear,

but his is an uncracked motor. so no forged nothing. but saying that it has 3 days of dyno time tuning it to perfection. he had a problem holding boost in top end yesterday, might be actuator or something, but he has pumped out 370rwhp or 275kw running up to 1.4 bar on street tyres, and did show a few ppl his dyno sheets from previous dyno runs he has had. so i dont think semi slick rubber is gonna make a difference in hp, otherwise col wouldnt have cracked 300 if his car was wheel spinning the first time, he wouldnt have grabbed tracion with more power.

Edited by 85URK

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...