Jump to content
SAU Community

Recommended Posts

dud it's hobart, anywhere you get a place is 10 minuts from town.

BUT the first place (1) is crap, theer is parking available on teh opposite side of the road, but i wouldn't leave my car there. TOOO many people driving past and all.

Number 2) is ok location wise, it's actually more Toroona or so (can't speel it properly) propably 12-15 minuts drive.

Number 3) is off lower cascade road, not bad, get preatty cold though.

  • 4 weeks later...

Hey guys. I've finally arrived. I'm staying just at the woolstore until i move into a place near the casino. I spotted a few skylines already on Saturday when i arrived. I spotted an orange 33 with the plates GTAAH(is it actually a GTR???), a purple 33 GTR, a green 32 gts-t(looked nice) and a black gts-t. I also spotted a nice blue R33 during the drive down as i entered Hobart. Any of you guys???

Anyway after the trip my car is dirty a sh*t and was just wondering is there any good carwashes around the place because i haven't had much time to look around for one.

Cheers,

Johnny

Hey guys. I've finally arrived. I'm staying just at the woolstore until i move into a place near the casino. I spotted a few skylines already on Saturday when i arrived. I spotted an orange 33 with the plates GTAAH(is it actually a GTR???), a purple 33 GTR, a green 32 gts-t(looked nice) and a black gts-t. I also spotted a nice blue R33 during the drive down as i entered Hobart. Any of you guys???

Anyway after the trip my car is dirty a sh*t and was just wondering is there any good carwashes around the place because i haven't had much time to look around for one.

Cheers,

Johnny

GTAAH is powered by RB26 hence the plates, id say its Grimo's purple GTR, dont know any green GTS-t, only know Lukes GTR and i can think of about 8 black 32 GTS-t's off the top of my head :P

If your after a brushless car wash then there are a couple around: Hungry Jacks/Shell servo in North Hobart, Shiners in Moonah or on the Brooker, great wash bay in Kingston (oppostite the Golden Arches)

Have to organise a meet up when everyone is free so you can meet all the guys and put some faces to names :)

Hey mate,

Welcome to Hobart!!! Pity you didn't come a few days earlier, you could have caught the opening round of the Tassie Drift Series, would have been an ideal place to meet everyone. Oh well, have to have a meet up instead. Be good to show you around and if you need anyone to show you the roads, my hand is up :):P

Hope to see you round

Scotty

GTAAH is powered by RB26 hence the plates, id say its Grimo's purple GTR, dont know any green GTS-t, only know Lukes GTR and i can think of about 8 black 32 GTS-t's off the top of my head :(

Yeah I didn't think the orange 33 was a GTR but it did sound pretty tough.

If your after a brushless car wash then there are a couple around: Hungry Jacks/Shell servo in North Hobart, Shiners in Moonah or on the Brooker, great wash bay in Kingston (oppostite the Golden Arches)

Thanks for that. It's heaps dirty now and i havne't had much time to look for one.

Have to organise a meet up when everyone is free so you can meet all the guys and put some faces to names :)

Yeah that would be good. Me and my girlfriend don't know anybody here. Were are some good places to go out aswell?? We went to syrup on saturday night and got pretty wasted.

Hey mate,

Welcome to Hobart!!! Pity you didn't come a few days earlier, you could have caught the opening round of the Tassie Drift Series, would have been an ideal place to meet everyone. Oh well, have to have a meet up instead. Be good to show you around and if you need anyone to show you the roads, my hand is up :laugh: :laugh:

Hope to see you round

Scotty

Yeah i would have liked to watch the drifting. Used to go occasionally on friday nights in sydney. By the looks of it there are a fair bit of nice and twisty roads around. Not sure where to go so you might have to help me out with them.

A guided tour of Tassies best driving roads......sounds like a job I was born to do :huh:

Seriously, you could spend 2 straight weeks 600k's a day driving Tassie and still not get all the good roads in.

MMM thinking cruise FTW ! meet up at Aquatics center, through geilston bay, grass tree, sorell macca's and back along the highway????

Yeah well i'm up for a cruise whenever you guys are. I've heard good things of these tassie roads and can't wait to drive on them.

Also do any of you guys know a good smash repair place here because i finally have to get my car fixed and need to get some quotes for insurance. I just some small damage on the rear of it and the front lip has broken a clip.

I have seen great work out of a few places, Brighton smash repairs a mate had some work done on his 32 there was immaculate! maybe Minty's in mornington rd but they are expensive, Hobart Crash repairs

Thanks.

I'll have a look into those places. I have to go to atleast one that they tell me to. Hobart smash repairs was one of them. I'll try get a quote from them and maybe that brighton smash repairs.

Hey guys. I've finally arrived. I'm staying just at the woolstore until i move into a place near the casino. I spotted a few skylines already on Saturday when i arrived. I spotted an orange 33 with the plates GTAAH(is it actually a GTR???), a purple 33 GTR, a green 32 gts-t(looked nice) and a black gts-t. I also spotted a nice blue R33 during the drive down as i entered Hobart. Any of you guys???

Anyway after the trip my car is dirty a sh*t and was just wondering is there any good carwashes around the place because i haven't had much time to look around for one.

Cheers,

Johnny

Yeah i know the bloke who owns the orange r33 it has a rb26dett in it and does fly for a 33.

Yeah i know the bloke who owns the orange r33 it has a rb26dett in it and does fly for a 33.

Well tell him thanks for parking in the woolstore last night for whatever reason because i couldn't find any parking and had to go to a carpark a block away. :thumbsup:

Well tell him thanks for parking in the woolstore last night for whatever reason because i couldn't find any parking and had to go to a carpark a block away. :dry:

Just leave your car at work, probably safer :happy:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...