Jump to content
SAU Community

Recommended Posts

hi guys i have a s2 r33 gtst and i amwondering wat to do next.

ok so far i have standard turbo still. i have a hks airpod, bov. boost controller running 12 psi,

full cat back exhaust and i am putting on a dump pipe and front mount intercooler next week.

at the moment i am just keeping the standard turbo. is there aything else i need to do with these sorts of mods?? eg, fuel cut defender? upgrade fuel pummp?

whats next?? please help?

Link to comment
https://www.sau.com.au/forums/topic/159051-r33-gtst-wat-next/
Share on other sites

how much power you chasing id go for the smarts things liek a power fc plug in n play easy also a walbro fuel pump and maybe some injectors and if you wanna do a turbo as i think you do try one of these

KKR430

http://www.otomoto.com.au/kkrturbo.htm

all pretty resiable priced wont cost you a arm and a leg but still get awsome results

it depends on wat your chaing big power or nice n reliable all round 240rwkw

how much power you chasing id go for the smarts things liek a power fc plug in n play easy also a walbro fuel pump and maybe some injectors and if you wanna do a turbo as i think you do try one of these

KKR430

http://www.otomoto.com.au/kkrturbo.htm

all pretty resiable priced wont cost you a arm and a leg but still get awsome results

it depends on wat your chaing big power or nice n reliable all round 240rwkw

if i add the kkr do i need to replace the manifold or will the standard be rite?? and do i need a external wastegate? or would an easier choice be to high flow the turbo

direct replacement nothing required

yeh so it is a direct replacement hey. sounds good hey. not to expensive either. pretty cheap/

are they of good quality. tough??

so no external wastegate needed ??

wat else would i need to do? if i got the kkr i would need upgrade fuel pump, ecu? and injctors.

is that all>?>

yeh so it is a direct replacement hey. sounds good hey. not to expensive either. pretty cheap/

are they of good quality. tough??

so no external wastegate needed ??

wat else would i need to do? if i got the kkr i would need upgrade fuel pump, ecu? and injctors.

is that all>?>

these turbos are on the ls1 tt kits have a look on the bottom of that page good quality turobs no waste gate needed internal gated

KKR turbos are not direct replacement.

If your not looking for huge power get one of the slide highflows, not much better "bang for your buck". (Search for slide) And alot more stealth, which is always important in good old victoria.

But like Paul said before you do anything get fuel pump and tune.

KKR380

The ultimate turbo for SR20 or large twin-turbo applications

Water-cooled, 0.86 turbine housing, suits T25 size flange

Internal wastegate with 8psi actuator

Suitable for single-turbo applications on 2.0-2.5 litre engines, or in

twin turbo kits on 4.0 to 6.0 litre engines

Comes with exhaust flange featuring 3-bolt outlet, T25 exhaust gasket,

oil inlet banjo bolt and oil return gasket.

thats the one id go for with a power fc n pump since you have the rest

these turbos are on the ls1 tt kits have a look on the bottom of that page good quality turobs no waste gate needed internal gated

yeh had a look. yeh so 840 bucks later and this could be on my skyline hey. good power output from it i am guessing. i was chasing around the 230 mark.

i am happy with this turbo. it sounds the way to go. wont need to change dump pipe will i??

id be guessing so ring him ask him he is pretty good to talk to but like i said dont go getting a turbo n say yer awsome invest in a ecu power fc is the best option with a fuel pump you looking at aorund 1200 for both even cheaper if you look around then get the turbo

id be guessing so ring him ask him he is pretty good to talk to but like i said dont go getting a turbo n say yer awsome invest in a ecu power fc is the best option with a fuel pump you looking at aorund 1200 for both even cheaper if you look around then get the turbo

yeh my pipe and intercooler are on this week and then i will be saving my pennys and looking to get my hands on a new fuel pump and ecu. and yeh either this option or high flowed option sounds good

Also if you dont have one yet get an upgraded clutch and flywheel combo, also some good brake pads and fluid. All the power in the world is useless if you cant slow it down.

yeh i gathered about the clutch giving way.

thanks for your help guys. will be looking forward to getting it done down the track. would be interested to see how much power i have now at the wheels

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...