Jump to content
SAU Community

Recommended Posts

Righto so ive got the impression that my pump isnt working. Although as far as i know the engine hasnt seized up and its not making any nocking noises yet. So im wondering has anyone changed the oil pump on there car or payed someone to do it and how much did it cost? I would probably rather myself do it because there isnt really many machenics i would trust where i live, but if its a straight forward job id pay someone to do it over myself doing it. My mate said i would have to pull the engine out... but i dunno, if i had to go to that much trouble i would just buy another engine or rebuild it anyway. Ive had a look at some diagrams of the RB26 yeah yeah it doesnt look easy. hope someone can help

Cheers

Link to comment
https://www.sau.com.au/forums/topic/159217-changing-r32-gtr-oil-pump/
Share on other sites

simplified version :

Removal:

Remove Harmonic balancer and timing gear on the crank. including half moon keys.

drop the sump down about 20mm at the front

undo all bolts on the oil pump and slide forward.

Install:

new oil pump gasket,

install pump back onto crank collar,

bolt up in order specified in the workshop manual

reseal sump and bolt onto block

reinstall timing gear and belt and balancer.

prime oil pump by pouring oil into the outlet pipe on the oil filter assemply

crank engine without spark or fuel to confirm oil pressure

  • 3 months later...

I had a quote for and engine out engine in for 2 grand.

Thats just taking the engine out so i can work on it and then one i am done putting it back in.

I have been told you need the engine out for a GTR rb26 (in the r32 anyway) because of all the gear under the sump not allowing you to drop it.

Just what i have heard no practical expirence. (yet)

Unfortunately with early R32 RB26's it's not as simple as just changing out the oil pump.

Early RB26's ran a much shorter drive collar on the crank snouts & the only way to rectify this is "engine out, crank out". From there you can either choose to have an extended collar fitted to your existing crank, replace it with a later model item that comes from the factory with the longer crank snout or go "all out" with a stroker bottom-end from HKS, Jun etc.

With the cost & effort involved to go this far it's a good idea to look at the viability of re-building the rest of the engine. Forged pistons are good insurance for when you get the bug & want to run more boost & whatever you do, NEVER RE-USE OLD ROD BOLTS!! Have the rods prepped, re-sized, new bolts & you should be good-to-go.

Another option worth considering is going to a dry-sump setup. A lot of people consider a dry-sump to be over-kill for anything short of a dedicated race car but with a well sorted GTR they are almost mandatory in my opinion. Not only will this take care of "oil surge" by making sure the engine has a supply of oil 100% of the time, by plumbing a scavenge stage to the back of the head it stops all the oil collecting in the head & away from the pick-up as tends to happen with the factory wet-sump.

I am about to start offering dry-sump systems initially for all RB-series engines on a "change-over" basis, meaning, where possible, we can ship out a complete kit incl sump & once you fit everything, you send your old sump back so as to minimise the amount of time your car is off the road. Also by the time you factor in the cost of a new or modified crank & new N1 or Jun oil pump (which you won't need with a dry-sump) & an extended & baffled sump etc a complete dry-sump system becomes a lot more financially viable than most people think.

For more info, prices etc on all of the above, send me a PM or call anytime

:action-smiley-069:

John

0413 615955

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...