Jump to content
SAU Community

Recommended Posts

Hey all,might be a stupid question,but I have just had an oil cooler mounted up to my RB26.Should the oil level read differently on the dip stick now I have more oil in there. i.e.once the engine has cooled and sat for a while?Did a search but nothing came of it.Cheers.

Link to comment
https://www.sau.com.au/forums/topic/159505-oil-level/
Share on other sites

Someone mounted it FOR you? Or you put it in?

You'd have a lower level of oil because of the volume that the lines and core will need.

So if you had it fitted for you, i'd say the mechanic would have known about the extra oil needed, and topped it up for you (or full flush), so now your oil level is higher?

It will go higher with heat too, but the idea of the cooler is to lower the temps or keep them stable, so just HAVING a cooler shouldn't make the level go higher.

Link to comment
https://www.sau.com.au/forums/topic/159505-oil-level/#findComment-2961411
Share on other sites

I had it mounted for me.Yeah they said they had to add more in to obviously account for the oil lines and so forth.I have checked it a couple of times and it reads a little bit higher than the full mark once it has settled and cooled.Thanks for the advice,I just wasn't quite sure.

Link to comment
https://www.sau.com.au/forums/topic/159505-oil-level/#findComment-2968207
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
×
×
  • Create New...