Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

For xbox Forza FTW. Addicted to that game lol

To drift make sure u obviously turn off all the traction & stability crap.

If i feel like drifting I do the down hill point-to-point mountain run (forgotten what it's called) and i use an s15 that i built with an Rb26 in it. It's nuts cos there's never any traction but it's fun to swing the ass round all the way down and try not to hit a rail. Also I found the 300zx if you tune them to around 300kw they are quite easy to drift with.

Also try the Lotus exige, for some reason it is the easiest to control for drifts but lacks power unless you mod it up.

But yeah it's a sweet as game. I wanna play the new one on 360.

  • 3 weeks later...

forza by far.... I have 2 s15's with rb26 one's just nuts and the other is tuned much lower but makes a great drift car. I also use the gtr's, s14, s15 (sr20), 300zx and the nsx. I wish it had some gtst's in it!!!

  • 2 months later...

forza is such a good game for the realistic approach... s15 with the rb26 is insane just accel to break traction.... need for speed carbon is madass though... r34 goes off.... can do a whole track in one drift lol... is anyone big fans of forza 2??

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...