Jump to content
SAU Community

Recommended Posts

ENGINE:

127,500 kms on the clock Motor was rebuilt about 12,000kms ago stock rebuild. but rocker arm stoppers have been replaced

IHI High Flowed Dual Ball Bearing Turbo with HKS Actuator, S14 Injectors,

Blitz BL Front Mount Intercooler (The FMIC piping is set up to run two blow

off valves at the same time.HKS 1.2mm Metal Head Gasket, Reground Cams ,Rocker Arm Stopper Kit, NISMO Fuel Pump, GFB Alloy Crank Pulley, Yashio Factory Radiator, APEXI Pod Filter, HKS Low Mount Manifold, HKS Dump Pipe,Custom Front Pipe, Tiny Dry Cell Battery

EXTERIOR:

Under went a full Respray recently"Cranberry Red With Ice Purple Pearl".

Roof in black with the same pearl. GP Sports Front Bar,

Nismo Side Skirts, Vertex Rear Bar, 30mm Nismo Flared Metal Front Guards, 30mm

Blister Fibreglass Widebody rear quarters, Clear VT

Indicators, The body line, boot holes, antenna hole, rear wiper hole and rear windscreen jet hole have all been shaved

INTERIOR:

Momo 330mm Steering Wheel, Drift Handbrake Button, HKS Boost Gauge with A-Pillar

Mount, Omori Water Temp Gauge, Glove Box retrimmed in Red, Driver's Leg Pads, Tomei Short

Shifter, Pivot Sleepy Eye Controller,Central20 280kph Speedo

Fire Extinguisher Mounted In Passenger Footwell, Metal Gear Knob

Blitz Turbo Timer, Immobilizer, Carrozzeria 6.5inch 2-way Splits discreetly

mounted in doors, Pioneer 4x6inch 2-way Splits in the rear

SUSPENSION/DRIVELINE:

Heavy Duty Kevlar Clutch, NISMO Lightend Flywheel, GTR 5 Stud

& Brake Conversion (4 Pot Front, 2 Pot Rear),GTR Brake Master Cylinder (No ABS),Power Enterprise

Ferrodo Racing Pads (Front),EBC Pads (Rear),Braided Brake Lines, Whiteline Swaybars Front and

Rear, Tein Castor Rods, Adjustable Rear Upper Arms, Adjustable Rear Toe Arms,S14 Steering Rack

S14 Lower Front & Rear Strut.

*210kw was made @ 15psi* was made with power fc more can be obtained just didn't want to raise boost much higher

Things not included in sale

Dvd Head unit - can provide a double din cd player

Exhuast - Will be stock

Koya Drift Teks - S15 Rims

Power Fc - Has Been Swapped Back for the ecu that came with the car

From the previous owners ad

So here is the deal Offers Around $13,000 i am in the prosess of getting a T28 or something bigger put on should be done within 24 hours of this edit so no later than 12 march afternoon it will come with RWC and A Full 12 Months Rego.

The damaged head light in the photo will be fixed

Also having issues with 4th gear syncro but gearbox works fine other than that ( brand new 3 puck in there and Nismo Lightend fly wheel.

post-32624-1173318036.jpg

post-32624-1173318206.jpg

post-32624-1173318549.jpg

post-32624-1173318674.jpg

post-32624-1173318836.jpg

post-32624-1173318952.jpg

post-32624-1173320374.jpg

Edited by Rps13
Link to comment
https://www.sau.com.au/forums/topic/159609-widebody-180sx/
Share on other sites

God! If I had the money I would buy this! though, if it isnt road worthy or in road worthy condition I would offer you 10 flat.

Yeah i dont know why people are not intrested at this price but i think its cos there is no RWC cos when i said it came with RWC b4 the turbo played up people were very intrested and that was for a lot more money.

Any way you will see it up next week for a bit more money because i am getting thr turbo replaced and a RWC and a FULL YEARS rego so some one can come and just take it away ill prob be asking aroung the $13,000 mark but not 100% yet

Link to comment
https://www.sau.com.au/forums/topic/159609-widebody-180sx/#findComment-2966854
Share on other sites

Update:

So here is the deal Offers Around $13,000 i am in the prosess of getting a T28 or something bigger put on should be done within 24 hours of this edit so no later than 12 march afternoon it will come with RWC and A Full 12 Months Rego.

The damaged head light in the photo will be fixed

Edited by Rps13
Link to comment
https://www.sau.com.au/forums/topic/159609-widebody-180sx/#findComment-2970173
Share on other sites

Here are pics of the Brand New turbo that is going on the car tmorrow its slightley larger than a T28 and can handel more power.

So who ever buys the car can know it has a Brand new turbo on it

post-32624-1173700933.jpg

Link to comment
https://www.sau.com.au/forums/topic/159609-widebody-180sx/#findComment-2973120
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...