Jump to content
SAU Community

Recommended Posts

Hi Boyz and Girlz

Just looking 4 somewhere good in sydney 2 tune my power fc computer on a dyno.

Any1 had 1st hand experience with anyone good or know somewhere that is very good with them?

ThanX

Jamie

:Pimp:

Link to comment
https://www.sau.com.au/forums/topic/15964-power-fc-tuners-in-syd/
Share on other sites

Try Ric Shaw Performance. Dad (Bonkers) has had very good things to say about Ric. See this thread for more details

I will be taking my car there as soon as I get an issue sorted with it.

If you live at noosa though how come your getting car tuned in sydney?

Dan.

my car is down there now alllready and it is hard tryin to find some1 reputable up here.

I am pretty sure i am gonna get croydon racing development to tune it. they have years of experience with tha power fc

Originally posted by «Cyph3r»

my car is down there now alllready and it is hard tryin to find some1 reputable up here.

I am pretty sure i am gonna get croydon racing development to tune it. they have years of experience with tha power fc

Let us know how it goes with the pinging and such after CRD tune it :D

Guest SXU29T

hope u bring ur check book though! my friend supposably was getting his car tuned their for $140... but his car wasn't boostin properly and they had to use a few cable ties to secure the vacum lines (his gts-t s2 got 156rwkw @ 12psi with dumpy back exu & filter is that normal?)....well any way 40mins later when he had to pay they said that'll be $375!!!!.....a bit david jones for mine maybe they jus saw us comin?or may be thats why they changed their names from " croydon autowroughts"... to croydon racing developments.

There are lots of recommendations for tuning and other work - but let's just say I'd never go to any place that change their pricing (much) from their original quote... esp. not $140 -> $375.

Put it this way, I paid $1,000 (for example) to change a turbo and things went up shit creek but it still ended up costing me $1,000 even though I wasted a lot of peoples' time and patience.

T.

I got told on avg it tends to be $600 for a full days work. They empty the fuel tank and fill it with fresh fuel. THey then check all the hoses for vaccuum and ic pipes check plugs and make sure right heat range gaps etcc and just generally go over the mechanicals 2 check evrythin b4 they even start it on the dyno. Then when tuning they don't just change af ratio they can change just about every parameter the power fc offers with the laptop software they use, rather than just stuffin round wit a commander =P

I don't mind paying for quality work

I will let u know how it goes

:Pimp:

Jamie

You're kidding yourself if you think there are lots of tuners who have the Apex'i software.

Datalogit? Maybe... but not the full on Apex'i licensed software.

I'm not willing to do a full on dyno tune until I'm COMPLETELY finished with all engine mods.

And at this junture I need close onto $3,000 to finish everything off, so hopefully not too far now :(

T.

The power fc commander is exactly that... a commander... you can change evey parameter in the computer that is required for tuning the car that it is designed for, which I believe is some 800+ parameters.

Croydon is not my choice as for the money they charge I can get my car tuned twice at Ric Shaws, and I have heard and seen similar results from both.

Originally posted by SXU29T

hope u bring ur check book though! my friend supposably was getting his car tuned their for $140... but his car wasn't boostin properly and they had to use a few cable ties to secure the vacum lines (his gts-t s2 got 156rwkw @ 12psi with dumpy back exu & filter is that normal?)....well any way 40mins later when he had to pay they said that'll be $375!!!!.....a bit david jones for mine maybe they jus saw us comin?or may be thats why they changed their names from " croydon autowroughts"... to croydon racing developments.

that power figure seems low, but then, the dyno settings may have been set to abnormal conditions, or maybe it has a monster torque curve instead :(

ed,

Your power out put is proportional to the amount of boost you run mostly. If it has a power fc the it will manage the engine a bit better and can be programmed to give more fuel change timing etc to gain a little more power. If it had a power fc then probably a mark of 175-190rwkw depending on condition of other engine parts and connections etc.

  • 7 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...