Jump to content
SAU Community

Recommended Posts

Originally posted by SteveL

RB30ET also uses upgraded rod bolts.

theres no difference between rods and rod bolts.

when we rebuild these bottoms its common to put say arp bolts in but stock nissan is extremely good.

but most ppl just get em resized then the whole shootin match balanced - rb30s are tough as guts

Originally posted by OVL-747

theres no difference between rods and rod bolts.

We'll have to agree to disagree. I build these engines too, and the VLT r/bolts are definately an upgrade from the NA type. They even have a different PN...but apart from that, I can say the material is superior, having actually tested them in comparison. But as you say rods are identical.

ARP don't make rod bolts for any RB engine. The closest thing they have is VG30DETT bolts. Of course, it's possible to ream out the bolt holes to accept something for another engine (eg we use chev bolts in 2L U series Nissan engines).

It seems to be a standard belief that high power motors need big oil pumps. I have never understood this logic.

The larger capacity oil pumps are only needed to maintain oil pressure at idle. Think about it.

If you have an RB30E, you only need a certain sized pump to stop the oil light coming on at idle. Now if you have an RB30ET the turbo oil flow bleeds off a lot of oil from the engine, so they fit a larger displacement pump.

Same thing with the RB25DE, extra camshaft = more oil needed. RB25DET, bigger again, extra cam plus turbo.

RB26DETT, has two turbos, extra cam, plus oil squirters, so you need a really big oil pump, but only really at slow idle.

Now oil pump flow is proportional to engine RPM, so at say 2,500 RPM even a small oil pump is going to easily provide enough flow and pressure for any situation. The problem really only exists at idle RPM.

So the theory that you need a massive high volume oil pump for that 9,000 RPM racing engine is simply not true, quite the reverse in fact.

But if you are building a street RB30DETT, a big pump would be a very good idea, no matter what the final power rating.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...