Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

because for what i use it for (i.e. driving it to work, in peak hour traffic) it is just not what i need any more.... i need/want something that is easy to drive in stop/start traffic (i.e. Auto) and with leather interior, and lots of torque available (without having to rev the hell out of it to bring it on boost)...

also, due to limited parking when at work, i sometimes have to park it on the street, and i spend all day worried sick that a bird will have crapped on the car , or someone has keyed it, or reversed into it or broken into it etc....

i just want something everyday that is comfy and cruisey, and will 'blend in' so to speak.... also looking to buy something for cheaper than i sell the skyline, as i'm looking at buying an investment/rental property, and some of the money saved from selling the skyline will be going towards that

hey mate hope you get what you want for it, i have been drowling over this for a long time(even though i have mine) i will be lucky to get mine even in half the condition yours is in.

Best of luck buddy.

Edited by Oblivion
  • 3 weeks later...


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...