Jump to content
SAU Community

R33 Instrumentation Cluster

NISMO_R33_GTS_T

By NISMO_R33_GTS_T,
in General Maintenance

 Share

Recommended Posts

NISMO_R33_GTS_T Apprentice

NISMO_R33_GTS_T

Posted
Posted

Hey guys,

After months of intermittent flickering/bouncing of my tacho needle....its seems as though my tacho has finally had enough and wont run past 2000rpm any more!

I've read the DIY guide by 'pushead' on removing the instrumentation cluster and it seems to be fairly easy.....btw awsome guide (lots of detail an great pics)...cheers.

I still have a few question though -

1) The guide finishes with the cluster coming out of the dash, but still connected.....what happens next? Are the wires running to the cluster - soldered? or do they use connnectors?

2) When replacing the cluster, do you need to calibrate it? How do u go about this calibration proceedure?

3) Does anyone know where i can buy a 'new' cluster? or can u only buy 2nd hand ones? How much am i expecting to pay?

4) Do you know of any instrumentation experts where i can get the work done? How much roughly am i looking at? (I dont know if i will do the work myself or not? It depends on how much stuffing around is involved and how cheap it is - to simply get the work done by someone else.)

Cheers,

:P

Link to comment
https://www.sau.com.au/forums/topic/163320-r33-instrumentation-cluster/
Share on other sites
ECR033 Mentor

ECR033

Posted
Posted
Hey guys,

After months of intermittent flickering/bouncing of my tacho needle....its seems as though my tacho has finally had enough and wont run past 2000rpm any more!

I've read the DIY guide by 'pushead' on removing the instrumentation cluster and it seems to be fairly easy.....btw awsome guide (lots of detail an great pics)...cheers.

I still have a few question though -

1) The guide finishes with the cluster coming out of the dash, but still connected.....what happens next? Are the wires running to the cluster - soldered? or do they use connnectors?

2) When replacing the cluster, do you need to calibrate it? How do u go about this calibration proceedure?

3) Does anyone know where i can buy a 'new' cluster? or can u only buy 2nd hand ones? How much am i expecting to pay?

4) Do you know of any instrumentation experts where i can get the work done? How much roughly am i looking at? (I dont know if i will do the work myself or not? It depends on how much stuffing around is involved and how cheap it is - to simply get the work done by someone else.)

Cheers,

:P

To answer your questions in order...

1) The wires to the cluster use connectors - just need to pop them out

2) I didn't calibrate my speedo when I installed my Nismo dash, but i did do some sanity checks - i.e checked the speed displayed on the speedo against the speed readout on my PFC and also got my g/f to drive next to my car and compared my speedo with the speed her car was displaying at 60, 80 and 100km/h. My speedo was pretty much spot on (give or take), so didn't bother calibrating, although I would've done so if it was substantially out.

3) I doubt that you'll be able to get a new dash cluster, although if they were available, then a Nissan dealer would be the best bet (they may be able to order in). If you're after a second hand dash, I have one in perfect working condition that came out of my S2 R33 that I'd sell for $150 (plus postage).

4) Replacing the dash is pretty easy - the DIY guide is excellent and you should be able to do it yourself without any problems, so you shouldn't need to pay anyone to do it for you.

Cheers :happy:

RBwhatever Veteran

RBwhatever

Posted
Posted

If you pull the cluster apart its possible to find whats wrong with it.

There could be a few 'dry' connections where the female connector is connected to the circuit board. you can tell this by looking at them and if the solder looks as if it has been broken.

This happened a to my pulsar when I had it. Just had re-solder those connections and bob's your aunty.

You might have a different problem though.

ps. why was this posted in the DIY section aswell?

NISMO_R33_GTS_T Apprentice

NISMO_R33_GTS_T

Posted
  • Author
Posted

cheers guys :huh:

i think ill take a look at it myself first...see if i can work out why its playing up, then go from there.

p.s. im not sure why this post appears in the DIY section as well - the first time i tried to post it, i accidently posted it in the DIY section and a message came up saying i couldnt post it in that section (the post was cancelled!) So i decided to post it here instead . Now its appearing in both??? I dunno? :happy:

NISMO_R33_GTS_T Apprentice

NISMO_R33_GTS_T

Posted
  • Author
Posted

It appears as though i have lost my copy of the DIY guide pushead posted about removing the instrumentation cluster!

Ive searched though the entire forum and cant seem to find a link that works (there is a DIY post with a link to pusheads guide - but the link doesnt work!) :)

Just wondering if anyone could re-post or re-link the guide....it would come in very handy, as i was planning on having a play with it tommorrow.

Cheers,

:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sinn3r
      R34 Skyline climate control unit transistor

      By sinn3r · Posted

      Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • GTSBoy
      Best place to order Authetic R32 Parts in Japan

      By GTSBoy · Posted

      I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • GTSBoy
      Ethanol Content Sensor - Always at 11%?

      By GTSBoy · Posted

      The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
×
×
  • Create New...