Jump to content
SAU Community

Recommended Posts

PICS

Item: RB26 Sump/front dif, complete with Tomei baffel kit.

Description: good condition, comes with Tomei sump baffel kit installed.

Price: $520

Item: Apexi air filters + apexi adapter pipes

Description: good condition, few scratches on pipes

Price: $110

Item: New RB26DETT Head Gasket

Description: Brand new Nissan head gasket to suit RB26 motor

Price: $50

Item: R32 GTR Standard front pipe

Description: Standard item, few scratches.

Price: $50 $20

Item: Tomei 1.2mil metal head gasket for RB26

Description: Brand new - cost me $464.65

Price: $320

Item: Reconditioned RB26DETT Head

Description: Rebuilt at Gavin Woods. Has Tomei cams already installed. Ready to drop onto an RB26 block. Looks great!

Price: $2900

Item: CP Pistons for RB26 - 87mil

Description: These are also Brand new, comes with all rings/pins. Comes in box ready to go.

Price: $1050

Item: Highmount manifold for RB26

Description: Cost $1200 new... Still basically new like everything else. The wastegate flange has now been cut off so you can have one welded on to suit your wastegate.

Price: only $770

Item: Custom intake for single turbo Rb26

Description: Looks great. Made at Godzilla Motorsport. Comes with silicon hose and clip, ready to instal.

Price: only $170

Item: RB26 Big end bearings - Brand new.

Description: New, in box. Cost $85.15 new

Price: $60

Item: RB26 Main bearings - Brand new.

Description: New, in box. Cost $173.80 new

Price: $135

Item: REV Billet conrods for rb26

Description: These were in my RB26 before the number 2 bearing spun. You can see a few marks on the no.2 rod. and you can see where it overheated. The others are fine, so may want to get no2 looked at or buy a new one seperatly.

Price: $170

Item: Exedy Clutch

Description: From my R32 GTR. I had this clutch installed before it went on the dyno. So has done basically no kms.

Price: $700

Item: Revolution Billet Flywheel

Description: I go tthis at the same time as the clutch.

Price: $170

Item: 82ERK Number plates - BZERK

Description: Never fittd to a car, Never registered. Navy blue writing on a silver plate.

Price: $900

PICS

Item: RB26 Sump/front dif, complete with Tomei baffel kit.

Description: good condition, comes with Tomei sump baffel kit installed.

Price: $520

Item: Apexi air filters + apexi adapter pipes

Description: good condition, few scratches on pipes

Price: $110

Item: New RB26DETT Head Gasket

Description: Brand new Nissan head gasket to suit RB26 motor

Price: $50

Item: R32 GTR Standard front pipe

Description: Standard item, few scratches.

Price: $50 $20

Item: Tomei 1.2mil metal head gasket for RB26

Description: Brand new - cost me $464.65

Price: $320

Item: Reconditioned RB26DETT Head

Description: Rebuilt at Gavin Woods. Has Tomei cams already installed. Ready to drop onto an RB26 block. Looks great!

Price: $2900

Item: CP Pistons for RB26 - 87mil

Description: These are also Brand new, comes with all rings/pins. Comes in box ready to go.

Price: $1050

Item: Highmount manifold for RB26

Description: Cost $1200 new... Still basically new like everything else. The wastegate flange has now been cut off so you can have one welded on to suit your wastegate.

Price: only $770

Item: Custom intake for single turbo Rb26

Description: Looks great. Made at Godzilla Motorsport. Comes with silicon hose and clip, ready to instal.

Price: only $170

Item: RB26 Big end bearings - Brand new.

Description: New, in box. Cost $85.15 new

Price: $60

Item: RB26 Main bearings - Brand new.

Description: New, in box. Cost $173.80 new

Price: $135

Item: REV Billet conrods for rb26

Description: These were in my RB26 before the number 2 bearing spun. You can see a few marks on the no.2 rod. and you can see where it overheated. The others are fine, so may want to get no2 looked at or buy a new one seperatly.

Price: $170

Item: Exedy Clutch

Description: From my R32 GTR. I had this clutch installed before it went on the dyno. So has done basically no kms.

Price: $700

Item: Revolution Billet Flywheel

Description: I go tthis at the same time as the clutch.

Price: $170

Item: 82ERK Number plates - BZERK

Description: Never fittd to a car, Never registered. Navy blue writing on a silver plate.

Price: $900

You have mail bro.

added parts:

Item: HKS Pod filters

Description: Nothing wrong with them at all

Price: $110

Item: RB26 Alternator

Description: RB26 Alternator in good condition

Price: $100

Item: RB26 Water pump

Description: Bought it for rebuild, used only for short time on dyno

Price: $100

pics for these are at the same link in 1st post

Tomei head gasket sold

New items:

HKS stainless steel cat back exhaust

Very quiet and sounds good.. nice looking muffler

$650

Hiflo cat

steel fins

$150

  • 3 years later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...