Jump to content
SAU Community

Recommended Posts

i can vouch for that turbo.....although i never went for a ride :3some:.......but that thing is insane on an rb20, especially when the external gate is fully open 1 meter from where your walking LOL.....free bump

more parts added,

- turbo sold pending payment. back up for sale.. sale fell through

- SAFC sold pending payment. back up for sale.. sale fell through

Edited by lwboosted
  • 2 weeks later...
  • 2 weeks later...

blooddsword27: frankston is s.e subs of melbourne.. the turbo is in excelent condition no shaftplay at all!!

Drift learner: yep bolts straight up to an r32, all you need to do is get some rubber hose and cut the lines that went to the rear hicas unit and loop them up.. then get a wheel alignment done.. its very easy to do, look in the DIY section i am sure there is a thread explaing how to do it.

got the manifold for the turbo? Correct me if im wrong, but, you said it is externally gated, therefor doesn't suit standard manifold.

Edited by Jago

i do have the manifold but i am using it for my new setup.. it is a standard manifold that has a flange cast welded to it to suit the external gate..

so the turbo does sit on the standard manifold with a 10mm spacer.. you can cast weld a flange in there, you can also buy a spacer of a trader on here (cant remember their name) that has an adaptor for an external gate.. or buy a ebay manifold for $200 to suit the external gate..

Edited by lwboosted

by doing a little bit of research i think the turbo may even be a trust TD06 17C it looks exactly the same as this turbo for sale.. same numbers and everything... can anyone confirm??

http://www.skylinesaustralia.com/forums/in...ernal+wastegate

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...