Jump to content
SAU Community

Recommended Posts

Robbo,

On the topic of the Zoom mag review of intercoolers or most things:

You know a statistically valid test involves a sample of 30 or greater.

They show a 7psi drop. I see a 2psi drop on mine.

At the end of the day what does it all mean?

A larger or even overly large FMIC will yeild a greater peak power than the stocker. However the time it takes for the same air volume to travel throught the FMIC is longer than the stock unit. Flow time is an enemy as much as lower horsepower flow is.

If you want to run a low 13 the standard intercooler does not present a problem.

I would rather pay a bit more money and get a decent FMIC or a second hand one. I don't think there's much point in upgrading to a slightly larger side mounter cooler, cos that is going to restrict u in the long run anyway. You could probably run 1-2psi higher? How much more power is that going to achieve? 5kW@engine at most???

rev, you've got some excellent results out of the stock intercooler, but I can't help but think you'd get that 12 with a FMIC. My car was a totally different drive when I put it on. Unless my stock IC was unusually more restrictive than most, I'm sure you'd experience the same thing.

Originally posted by MIC33R

rev, you've got some excellent results out of the stock intercooler, but I can't help but think you'd get that 12 with a FMIC. My car was a totally different drive when I put it on. Unless my stock IC was unusually more restrictive than most, I'm sure you'd experience the same thing.

Don't worry about the 12 now. It's in the bag.

My last effort of 13.3 was with only 4500rpm of useable rev range.

Remember I have done this with 205's, a much bigger hurdle than the power I do or don't have.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
×
×
  • Create New...