Jump to content
SAU Community

Recommended Posts

You better talk to Just Jap ( prol Steve ) directly for answers to the normal cost and normal delivery time of a zorst since mine is not an example of the norm, and is currently on the slowest ship to ever leave the coast of Japan :) I think it's one of those new "solar powered" freighters :D

wonder if the muffler is the same measurements from coupe to sedan (vice versa) and only differs in the length of the pipe from the cat to the muffler?

I don't know about 33's but on the 34's, the GTt coupe & GT sedan seem to have the same rear muffler fitment. The difference is the length of pipe from the back of the cat to the flange of the rear muffler.

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

still hasnt arrived scott?

Got it !! :):)

Will be fitting it this weekend ( allthough it's almost too nice to bolt under a car !! )

and before you ask, my digi camera is being repaired atm so if I can I'll borrow one and take some pics but none avail now.

Big cheers to Steve ( and the boys ) from Just Jap !!

Got it !! >_<:)

Will be fitting it this weekend ( allthough it's almost too nice to bolt under a car !! )

and before you ask, my digi camera is being repaired atm so if I can I'll borrow one and take some pics but none avail now.

Big cheers to Steve ( and the boys ) from Just Jap !!

I made an enquiry at just jap and they said that they have a customer that ordered a Fujitsubo in a 70mm 2 3/4" and would be worth $1299.00... is that yours? :) they were offerring me the same type as it would suit my car aswell.

they sent me the pics

post-37512-1177624687.jpg

I made an enquiry at just jap and they said that they have a customer that ordered a Fujitsubo in a 70mm 2 3/4" and would be worth $1299.00... is that yours? :thumbsup: they were offerring me the same type as it would suit my car aswell.

they sent me the pics

LOL ! Yep !! That's my new system in front of my car in the doorway of JJ :D

I know it's expensive, and there really are very few choices in "off the shelf" cat backs for the R34 N/A Sedans. That's why so many people get a system made up at an exhaust shop. It just comes down to what YOU want. THIS.....is what I want ;)

Can't wait to bolt it up !

you're right - it's too good to throw under the car!

i think i may have to invest in one of them in future and hack it up to fit the 33!

be sure to get some audio happening please!!! mine sounds like an unwell m3!

damn scott, i can see why your apprehensive about bolting it up under your car. that is a nice shiny exhaust.

now if only nengun would get back to me on when they're gonna relist the same fujitsubo exhaust so I can get one. would like to have that connected to the back of my coby extractors.

Well here's a few more pics to wet your appetite Reggi. Yeah, this would compliment your extractors nicely.

The outside of the rear muffler

post-2420-1177657113.jpg

The specs are actually dust. The outer finish is spotless.

Here's an example of the pipe diameter and mount support bracing

post-2420-1177657133.jpg

There's still ~5mm each side of the beer.

a good example of the weld quality and finish

post-2420-1177657148.jpg

and the extent of the internal finishing

post-2420-1177657091.jpg

and then there's the little hardware kit they give you

post-2420-1177657103.jpg

I was going to bolt it up this arvo but the beer accidently opened. Then I accidently open another one and now I'm thinking I'll start tomorrow morning :ninja:

BTW, I'd be interested to hear how things go with nengun !

if the muffler is available then that'll be sweet.

but if its the full catback then i guess i'd look into it too - just trying to find someone with a sedan so i can compare fitment etc... i'm expecting that i'd have to cut them off at the flange and shorten/twist them accordingly. there doesnt seem to be an off the shelf dual tip item for 33 coupe

Here ya go Reggi :sick:

Exhaust system Before & After

post-2420-1177728124.jpgpost-2420-1177728074.jpg

Rear Muffler Before & After

post-2420-1177728027.jpgpost-2420-1177728015.jpg

Rear Muffler Comparison

post-2420-1177728037.jpgpost-2420-1177728048.jpg

Front Muffler & Pipe Comparison

post-2420-1177727979.jpgpost-2420-1177727992.jpg

Full System Comparison

post-2420-1177728003.jpg

Also, here's a pic from my engine pipe to the cat ( same size pipes ) All Good !

post-2420-1177727940.jpg

Now here's a pic from the cat to the stock cat-back CHOKE !!

post-2420-1177727913.jpg

and then with the new system installed Sweeet.....

post-2420-1177727927.jpg

This shows the clearance ( haeps )

post-2420-1177728063.jpg

Last but not least, the tips :D

post-2420-1177727959.jpg

Sorry to any 64k users. :no:

NOW, the sound....... ( no sound file yet )

Sounds a bit like an M5 but with that distinctive RB sound. EXACTLY what I wanted ! Might be a bit quiet for some though.....

Sorry for jacking your thread MyR3408. If you want me to move all this, let me know :)

I'm going to have some lunch and then out for a drive :)

Here ya go Reggi :sick:

Exhaust system Before & After

post-2420-1177728124.jpgpost-2420-1177728074.jpg

Rear Muffler Before & After

post-2420-1177728027.jpgpost-2420-1177728015.jpg

Rear Muffler Comparison

post-2420-1177728037.jpgpost-2420-1177728048.jpg

Front Muffler & Pipe Comparison

post-2420-1177727979.jpgpost-2420-1177727992.jpg

Full System Comparison

post-2420-1177728003.jpg

Also, here's a pic from my engine pipe to the cat ( same size pipes ) All Good !

post-2420-1177727940.jpg

Now here's a pic from the cat to the stock cat-back CHOKE !!

post-2420-1177727913.jpg

and then with the new system installed Sweeet.....

post-2420-1177727927.jpg

This shows the clearance ( haeps )

post-2420-1177728063.jpg

Last but not least, the tips :)

post-2420-1177727959.jpg

Sorry to any 64k users. :D

NOW, the sound....... ( no sound file yet )

Sounds a bit like an M5 but with that distinctive RB sound. EXACTLY what I wanted ! Might be a bit quiet for some though.....

Sorry for jacking your thread MyR3408. If you want me to move all this, let me know :)

I'm going to have some lunch and then out for a drive :no:

Nah its cool u dun have to move it.

Must say.. Thats looks really good! :)

worth th $$ spent

did you car have the typical twin cam raspy'ness with the standard exhaust? let us know if this gets rid of it?

looks very very nice. money well spent

Nah Eug, with the stocky on it made a slight tinny noise when cold but when it warmed up it made no noise at all ! ( except maybe some hissing ) but in car, NONE ! :)

Now you can actually hear the crisp RB sound but it's still not over the top. In car just sounds sex ! :sick:

Eug, my car has the twin-cam raspyness you speak of, it's not very loud or noticeable, but I can tell it's there.

Scott, so did everything line up ok? hangers, etc?

What was the part no. again please?

Scott, so did everything line up ok? hangers, etc?

What was the part no. again please?

Everything lined up very well although it's slightly different from the original. It all seemed kinda loose and not 100% right ( alignment wise ) until you tighten the bolts up. Then it all falls into place :D

Part No.: Fujitsubo Legalis R product #770-15086

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah. Was just wondering if you were having a small stroke or if there was some slur/gaf/inside joke that I wasn't aware of.
    • That was a fark up, it's Salamanca Place I was thinking of. And now I'm curious as to what potential slur/gaf I have caused with Salamander Road, ha ha!
    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
×
×
  • Create New...