Jump to content
SAU Community

A'PEXi AVC-R -Vs- GReddy Pro-Fed B

Guest | hype^ |

By Guest | hype^ |,
in General Automotive Discussion

 Share

Recommended Posts

400HP Experienced

400HP

Posted
Posted

even though the Advan GTR started as a GTS4 its had a full transplant of all the GTR gear. Even most of the panels are GTR so its more a GTR than a GTS4. The only GTS4 part I can tell really is the sunroof.... then again I don't know a great deal about it.

The japs seem to like the Profec better but then again the Apexi has the nice rice factor :)

Also if you plan to get a PowerFC the AVC-R is an easy option.

Guest SadisticRage

Guest SadisticRage

Posted
Posted

From a practical perspective I have a preference towards the Profec B.

Sure the AVC-R holds the title for the most bells and whistles but in reality, how many people ACTUALLY have time to utilise all its features when driving....I tend to spend more time looking where Im going.

The other concern is that the AVC-R is only a relaible form of controller up to about 1.5bar...beyond that and its accuracy is seriously compromised.

I suspect this is why most of the big name Japanese tuning houses are not using the AVC-R in high output cars.

Fitzpatrick Speed Works Mentor

Fitzpatrick Speed Works

Posted
Posted

my advice is get niether i know this will met strong criticism but hear me out:uh-huh: If you have a standard turbo get a dual stage turbo smart if you have a bigg turbo set the boost through the wastegate. Now i just havent said this blindly ive had some experience on both and from talking to an expert in tuning this is my conclusion. you see if you do a dyno run with max boost max everything the computer sets this when you run lower boost it only resets to an extent so i believe your not saving that much extra juice or whatever by running it at a lower boost you better off running your car the way its tuned all the time if this means 15psi then thats it. I have a profec b but im goin to take it off my GTR n put it on the r33 (cause my mum drives it) cause i believe that extra wiring hassle with calibration and weight are not worth the small amount of fuel i would be saving!!:( Just my 2c worth. And i know its mainly the ease of just changing boost that is the luxury just something to think about if your tryin to decide between two part for your car a fmic or a profec b for instance:rolleyes:

Guest | hype^ |

Guest | hype^ |

Posted
Posted

bahaha xrsist..

but you aint making any sence...

your telling me to just run what its tuned at (max boost) all the time..

then why the need for a "dual stage" bc??

besides a EBC is much more accurate ...

but the choice between the EBC and a FMI is a good point..

XrSiSt Grand Master

XrSiSt

Posted
Posted
Originally posted by | hype^ |

bahaha xrsist..  

but you aint making any sence...

your telling me to just run what its tuned at (max boost) all the time..  

then why the need for a "dual stage" bc??  

besides a EBC is much more accurate ...  

but the choice between the EBC and a FMI is a good point..

- hahaa.. yea. one of those long days at work does that to you.

Basically what s13drifter is saying is that he would spend his

money on a fmic first before getting a EBC to keep detonation

at a minimal. You do want your engine to last don't you.. or have

you got conrods,cams new head and stuff lined up already????

If you really want to boost it, just buy a stage turbosmart or something for now.. It won't be hard to sell later.

Now back to the topic... If you really want the EBC, then by all

means get ProFec B... :uh-huh:

Fitzpatrick Speed Works Mentor

Fitzpatrick Speed Works

Posted
Posted

i agree with xrsist that the profec b is probs better unless you are goin to go to a power fc then the apexi is a better option. The reason that i suggested the daul stage bc is because it is cheap and if you really do need to use 2 different boost settings in your car. I know that they arent as accurate for curving boost spiking but unless you are willing to re callibrate your ebc often they arent as efficient in stopping boost spiking as alot of people think. Im not against them i just thought id mention other options for you Hype, cheers.

:(

Guest Impul 25T

Guest Impul 25T

Posted
Posted
Originally posted by 400HP

even though the Advan GTR started as a GTS4 its had a full transplant of all the GTR gear. Even most of the panels are GTR so its more a GTR than a GTS4. The only GTS4 part I can tell really is the sunroof.... then again I don't know a great deal about it.

The japs seem to like the Profec better but then again the Apexi has the nice rice factor :D  

Also if you plan to get a PowerFC the AVC-R is an easy option.

The only GTS4 bits left are the shell and chassis....

And I would agree with SadisticRage, the AVC-R isn't good above 1.5bar..... go with the ProfecB

Fitzpatrick Speed Works Mentor

Fitzpatrick Speed Works

Posted
Posted

Hype the apexi is better with a power fc cause it can be intergrated into the power fc as they are both Apexi. Im not sure on this but i think the power fc might have a extra pin in for the avc-r and maybe a sub menu through though the computer that recognises that you are using the boost controller. Can any one varify this i could of been told ****:eek:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...