Jump to content
SAU Community

Recommended Posts

ok guys its my moment of truth! REGENCY tomorrow morning!! everything i know of is out and ready so fingers crossed!! theres a few questions i need to answer.. 1- how long is an average inspection? 2- do they check under the dash? 3- wats the deal with exhaust smoke (as mine is blowing a little black due to no tune and sitting around for 6months)? 4- and i dunno about the db of my exhaust....

anyways this is my first trip any tips???

cheers guys if she comes good i will cruise with u guys soon and introduce myself!!!

Edited by rad33
Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/
Share on other sites

yes they probably will check everywhere and anywhere, including pilling off the ecu kick plate to see if its aftermarket.

Dont expect to come through first time and u will be ok. U will be suprised what they are most likely to pick on. Inspection tends to take as long as they feel like being picky.

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3077390
Share on other sites

yes they probably will check everywhere and anywhere, including pilling off the ecu kick plate to see if its aftermarket.

Dont expect to come through first time and u will be ok. U will be suprised what they are most likely to pick on. Inspection tends to take as long as they feel like being picky.

sounds hard

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3077616
Share on other sites

They generally don't check for aftermarket ecu's unless its been defected for it or something doesn't look right. i.e different injectors, afm etc.

Regarding turbo timers etc.. Just make sure its disabled and if possible shove it right up behind the dash where it can't be seen or felt. Good luck getting it back out though as there's next to no room up behind the dash's of these cars. :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3078341
Share on other sites

ok heres the verdict.....

FAILED lol..

as i expected, but all wasnt bad!! the inspector was a champ! we like talked about new mods and upgrades and wats a good turbo and stuff! he also showed me and gave me tips on getting it back on the road!

ne ways heres the list

-eye level rear brake light

-fuel regulator to be removed (didnt know i had one lol)

-boost controller solenoid to be removed

-rear centre seat belt to be fitted as compliance plate says 5 seater

-oil leak NEAR turbo to be cleaned

-both rack boots broken to be replaced

-RH rear steer inner rack end has play

-fix play at left front wheel bearing

-fix play at left front upper arm

-rh front upper arm bushes have play

-side indicator globes worn, need to be amber

now all i need is help on parts to fix, were i can get them, whos best to do it and $$$$$

oh he didnt even check to sound on my exhaust and he passed my gtr cooler!!

and he never saw my timer!!

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3079998
Share on other sites

sounds like a front left wheel bearing, a couple of bushes and a lil bit of other stuff to do

for the rack boots etc try

Driveshaft & CV Centre

12 Deloraine Rd Edwardstown 5039

(08) 8374 2944

if ya south(ish), i can put ya onto a mobile mechanic who mite be able to do some of that work for ya

otherwise i reccomend

Rod Webb Auto Electrical

2 Muriel Ave Somerton Park 5044

(08) 8294 4599

and of course, Boostworx

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3080094
Share on other sites

ok heres the verdict.....

FAILED lol..

as i expected, but all wasnt bad!! the inspector was a champ! we like talked about new mods and upgrades and wats a good turbo and stuff! he also showed me and gave me tips on getting it back on the road!

ne ways heres the list

-eye level rear brake light

-fuel regulator to be removed (didnt know i had one lol)

-boost controller solenoid to be removed

-rear centre seat belt to be fitted as compliance plate says 5 seater

-oil leak NEAR turbo to be cleaned

-both rack boots broken to be replaced

-RH rear steer inner rack end has play

-fix play at left front wheel bearing

-fix play at left front upper arm

-rh front upper arm bushes have play

-side indicator globes worn, need to be amber

now all i need is help on parts to fix, were i can get them, whos best to do it and $$$$$

oh he didnt even check to sound on my exhaust and he passed my gtr cooler!!

and he never saw my timer!!

just make sure you fix those problems for the next inspection and you're bound to pass. Seems like the majority of the problems listed you can do yourself, if you're willing haha.

Link to comment
https://www.sau.com.au/forums/topic/166195-defect-cleared/#findComment-3080575
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
    • He means "as opposed to mechanical cable drive". Older cars (R32 for ex.) had cable drive. Later cars with essentially the same gearbox, ie R34 GT (NA RB25) used essentially the same box as the R32 GTSt, but instead of a cable drive, had an electronic speed sender plugged into the same hole in the box, running from the same little gear that would have run the cable. Some of the shittier later cars use a speed sender on the nose of the diff, or the ABS sensors.
    • Lower than engine, or lower than it should at the hubs? Either way, that is a nice power figure and I'm not surprised you say it rips now. What stopped you from turning it up any more? Injectors? Or did it just stop responding to boost?
    • Got my 34 gtt tuned last week. Car made 362 wheel horsepower at 19 psi. Turbo was the ATR43SS. Only other upgrades were haltech 2000 series. 650cc injectors, walbro 250, fmic. Pro hub dyno reads 6% lower than actual figure according to my tuner. Car is a real ripper now.  IMG_7261.mov
×
×
  • Create New...