Jump to content
SAU Community

Recommended Posts

I bought this motor off Ash (R31Nismoid) and had It Freshened up by Racepace Motorsport as

soon as I got it. Was originally built by Racepace as well

Motor has not been ran in and has 0kms on it since freshened up

Only reason it is 4 sale is I have a change of plans for cars

All parts used in this build were brand new.

Only 2nd hand part was the GTR Rods which were checked

Motor bits

Arias 87mm Forged Pistons

Prepped GTR Rods

Machined/honed/prepped bottom end (and all that goes with it)

Nismo Bearings

Modified Oil galleries

Brand new headgasket

N1 oil pump

N1 water pump

All new belts/pulleys/tensioners

Nismo 740cc injectors

Z32 AFM,

Also comes

Turbosmart 45mm Ext Gate running a 15psi spring combination

Gate comes with all fittings and a screamer pipe

Apexi PowerFC with Hand Controller

Also able to supply a RB25DET gearbox at extra cost

Motor made 369rwkw@24psi when Ash had it

All the motor needs is turbo and manifold and u have a very tough motor

capable of making over 350rwkw with right turbo.

Price:$7000 without gearbox

$8000 with RB25DET gearbox

Pm for more details or ph:0417374102

Edited by BLUEGTR
Link to comment
https://www.sau.com.au/forums/topic/166713-rb25det-forged-motor/
Share on other sites

What cams, stock?

or is it just bottom end + other bits

Where are you located?

Thanks

Its full motor just needs manifold and turbo to be complete

Still stock cams was no need to change.

Located in Tassie

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...