Jump to content
SAU Community

Recommended Posts

Ok so before u go sayin shit.. ive looked around the search here and i cant really find what im after.. as the topic title says, i wanna know what model the standard turbo is on an R33 GTS-T. im lookin at purchasin one in the near future but currently am pricing things out and the turbo would b the first to go.. id want one with the same specs as the standard if i could just for peace of mind as i tend to like to "punch" the accelerater in my current ride.. ive looked everywhere on the web for the specs of the turbo but all ive found is that they are a ceramic turbo that can crack under high temps and hard drivin.. anything in regards to this is helpful cos i have always had a soft spot for the skyline and now it seems im able to do it

Link to comment
https://www.sau.com.au/forums/topic/166739-r33-standard-turbo-specs/
Share on other sites

assuming R33 as its the most common

0.50 a/r compressor (ish)

0.60 a/r exhaust side (ish)

plastic/nylon compressor wheel

ceramic exhaust wheel

ball bearing

oil cooled

water cooled

it fails due to excessive heat and shaft speed. excessive heat from a poor tune or "too much boost" from the user being a stupidhead and trying to squeeze that extra psi or two into it.

it can also fail from excessive shaft speed which creates heat/friction from running massive amounts of boost. recommended rebuild interval i think is 100,000kms

assuming R33 as its the most common

0.50 a/r compressor (ish)

0.60 a/r exhaust side (ish)

plastic/nylon compressor wheel

ceramic exhaust wheel

ball bearing

oil cooled

water cooled

it fails due to excessive heat and shaft speed. excessive heat from a poor tune or "too much boost" from the user being a stupidhead and trying to squeeze that extra psi or two into it.

it can also fail from excessive shaft speed which creates heat/friction from running massive amounts of boost. recommended rebuild interval i think is 100,000kms

thanx for that!! even if its not quite right it gives me somewhere to look at in regards to findin a replacement for it. thanx for that info

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
    • I think even the "commercial" capacity ones that you would hire from supermarkets etc wouldn't have the capacity to do all that much in one go. I will go through half a dozen tanks of solution and dumps/rinses of the waste tank for one little 2 seat sofa. Or similar for one 6 footish rug. That's the price you pay for something small that only takes up a bit of cupboard space, instead of something that takes up the entire laundry cupboard or half the shed.
×
×
  • Create New...