Jump to content
SAU Community

Recommended Posts

Has anyone out the with an R34 high flowed their factory turbo?

I am weighing up my options between high flowing my factory turbo for $1600 or buying a larger ball bearing turbo for $2500 - $3500

I know with the larger turbo's comes alot more lag, but does high flowing the factory turbo give a much greater increase in power?

I really don't know a great deal about turbo's, any info would be great

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/166816-hi-flow-factory-r34-gt-t-turbo/
Share on other sites

Is it safe to raise the boost after high flowing the factory turbo?

I have booked the car in next week to fit a Hybrid FMIC and install an APEXI AVCR boost controller, my mechanic advised not to run more that 13-14 psi.

What do you think a safe psi level is on the mods i am about to get?

You could raise it, but just abit. You'll end up hitting the stock ECU's saftey mechanism (rich and retard) when it detects too much airflow via the AFM. So you'll be maxing out your injectors and afm as well.

You're mechanic is wise, run no more then 12psi for constant acceleration. Any higher and the stock ceramic turbine wheel will fly out into your exhaust, 13-14psi may be okay for quick burst only.

If you're after a turbo for good power and decent responsiveness then hiflow is the way to go. Anywhere from 230-260rwkw and full boost from anywhere between 3000-4000rpm depending on the turbo/setup/etc. The HKS bolt on option are good as well, have a look into them. Theres a few for sale atm. HKS GT2530, GT2535, HKS GT-RS etc.

I know its been said before alot of times but seriously do a search, there were 2 threads asking the same question not long ago.

http://www.skylinesaustralia.com/forums/in...howtopic=166028

http://www.skylinesaustralia.com/forums/in...2&hl=hiflow

http://www.skylinesaustralia.com/forums/in...5&hl=hiflow

Oh forgot to mention that you should at least have these parts to fully take advantage of your new turbo

- stand alone ecu/computer

- turbo back exhaust with a good cat

- boost controller, electronic one better (AVC-R is good)

- fmic (good since your getting one)

- decent fuel pump, like a bosch

- injectors, nismo make 480cc, sard make 650cc and up

- afm, either a Q45 or Z32 one

And perhaps:

- Tomei poncams

- Splitfire coil packs

Don't forget to upgrade your brakes and suspension as well. No point having all that power and to not be able to use it properly.

Thanks Andi you have been a massive help.

I will search topics before starting them in future too, lol.

One more question, as the FMCI and Boost Controller is being fitted next week, what would you suggest to be the best bolt on mod?

Next mod I'd do for your car would be fuel pump and to look for a Power FC. You'll definately need a PFC (or some other form of aftermarket management) if you want to fully utilise your new turbo.

I've already got a HKS GT-RS on the way, but I won't be putting that on to much later. I figured I'd like to get all supsension and braking mods done and then fully utilise the standard turbo first before bolting up a bigger turbo. Your car would be a nice street weapon even with the stock turbo if you get decent suspension (shocks/springs/coilovers, swaybars front and rear, front caster kit, front and rear caster kit, pineapples/subframe cradle bushes) and some nice brake pads as the stock 310mm rotors and calipers of the GTT are fairly good from factory.

Whoops I forgot to mention what I've got done to my car atm.

- 3" SS split dump

- 3" SS hiflow cat

- 3.5" trust cat back

- apexi pod

- K&J tube and fin fmic with 2.5" piping

- greddy profec b 2

- bosch 040 pump

- power fc

Goes really well and once I get the PFC tuned for those mods it should be even better and should keep me satisfied for a few months before having to bolt on my new turbo. I just think its a waste if you go straight to changing the turbo when you haven't fully explored the limits of your standard one, who knows thats just me though. :thanks:

Nice mods, must go hard, have been trying to find a new Power F.C out there but with no luck? Any idea where i can source a new one?

Also, what mod do you feel made the biggest difference?

The Power FC will be ur next best mod and its sumthing u'll need for a hi-flow, can be hard to find these days but guess wot, just saw one for sale by Slide in the Traders section, be quick.....

I'm running a R34 High-Flow from Sliding Performance...

We managed to pull 250rwkw from 1 bar (automatic transmission) so that was quite an effort. For under $1000 delivered for the turbo; you can't really go wrong, especially if you're after a sensible / streetable level of power.

Other supporting mods apply:

Full Exhaust

Fuel Pump

Injectors

Cams (optional)

FPR

Air Filter

Head Gasket

ECU

blah blah blah...

As Andi has said though; suspension and braking is a key component that has to be looked at... without them you won't be able to effectively / safely use the power to be gained.

For a list of my mods; visit my site - it's a little off, but it's pretty much the setup for thet 250rwkw.

Thanks

Stan

If you want to get a highflow, and don't want to have your car off the road while you send it to gcg/precision to highflow, i've got an rb25 turbo that i'm lending aroudn to sau members to use so they dont' have their car off the road while the turbo's being highflowed.

I'm in sydney too. if you want, my number's 0403 211 482.

highflows are very good. good response and have potential to put out lots of power proviiding you've got all the supporting mods..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...